DN25__DN32__DN40__DN50__DN65 - 1.5''...8.0''

The Clorius pressure-balanced G1FB 2-way control valve is designed for regulating hot water, steam and hot oil systems. Balanced valves are used in installations where the system pressure necessitates a closing force greater than available in the actuator programme for a standard single-seated valve, and where the leakage rate for a double-seated valve is unacceptable. The G1FB 2-way control valve is used in conjunction with Clorius temperature- or pressure differential regulators for controlling industrial processes, district or central heating plants or marine installations. DESIGN The valve components – spindle, seat, cone and bellow – are made of stainless steel. The bellows for balancing the pressure are fitted on the valve spindle, which reduces the force necessary for closing the valve, as the upstream pressure of the medium through the hollow valve spindle acts outside and the pressure after the valve acts inside the bellow system. The valve body is made of nodular cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The thread for the actuator connection is G1B ISO 228. The valves are single-seated. The leakage rate is less than 0.05% of the full flow (according to VDI/VDE 2174). FUNCTION Without an actuator being connected, the valve is held in an open position using a spring and the bellow system. With pressure on the spindle, the valve will close. In connection with our thermostats, pneumatic or electric actuators, the valves will close at rising temperatures. For cooling circuits, the valve can be used in conjunction with a reverse acting electric actuator. Alternatively, a reverse acting double-seated valve can be used with our self-acting thermostats. The quadratic characteristic will not cease until the flow has dropped below 4% of the full flow.

The Chalwyn SVX hazardous area, flameproof series of butterfly air intake shutoff valves are ATEX approved for Zone 1, Gas Group IIB, T4 (135°C) or Zone 21 hazardous area applications. The SVX flameproof energize to open valve is designed with a œfail-safe actuation. When power is applied to the solenoid, the valve opens and is held open as long as power is supplied. When power is cut off for any reason, such as the detection of an engine over speed condition or other unsafe engine operating conditions, the valve will close. Features and Benefits ATEX Zone 1, Group IIB, T4 (135°C) or Zone 21 approved Externally switched solenoid Automatic closure on the loss of power Slim-fit 3, 5, and 8 (76mm, 127mm, and 203mm) valve body Basic flange mount with hose adaptors available (1½ to 8 | 38 to 203mm) Valve bodies and discs are PTFE coated rugged anodized aluminium The shaft and mechanisms are stainless steel

The Chalwyn PVX pneumatic spring return butterfly valve uses a spring return rotary actuator. It is available in two basic versions: Air pressure to open / spring return close on loss of air pressure (failsafe) Air pressure to close / spring return open on loss of air pressure Both versions are designed to work with direct pressure operation in either automatic or manual systems. Features For use in automatic or manual shutdown systems Operating pressure range 43.5 to 116psig (3 to 8bar) Slim-fit 3, 5, and 8 (76mm, 127mm, and 203mm) valve body Basic flange mount with hose adaptors available (1½ to 8 | 38 to 203mm) Valve bodies and discs are PTFE coated hard-anodized aluminium The shaft and mechanisms are stainless steel