Log into our Customer Portal to chat with a product specialist, check order status, and view on-hand counts of all our products.
Filter Sort
close
Categories
Filter By
Company
AC/DC Current
AC/DC Voltage
Accuracy
Ambient Temperature
Approvals
Approx Weight (lbs)
Block
Body Material
Body Material Spec
Bolt Circle Diameter (in)
Bonnet Type
Bore
Connection Type
Detection Range
Dial
DN
DWG Number
End Connection
Face to Face (mm)
Filling
Flange Diameter (in)
Flange Outside Diameter (mm)
Flow Rate (l/min)
F-Number
Gas Type
Height (mm)
Height, Open (mm)
IMPA Code
Inlet
Insertion Length
IP Rating
Lead Free
Material Grade
Material Spec
Measuring range
Medium Temperature
Nipple Length (in)
N-Øh (mm)
Nominal Diameter
Nominal Pressure
Nominal Size
Number of Bolt Holes
Operation Type
Outlet
Pixels
Pressure Range
Pressure Rating
Pressure Rating (PN)
Probe Length
Product Type
Rings Included
Schedule
Size
Size (in)
Size (mm)
Specification
Specification Type
Standard
Stem Material
Stem Type
Switching Function
Temperature Range
Tolerance
Trim Material
True RMS
Valve Type
Version
Wall Thickness (in)
Weight (kg)

Search Results

1998 items
1 - 9 of 1998
Jerguson Flashproof Magnetic Level Gage

Jerguson Flashproof Magnetic Level Gage

Magnicator

The Jerguson FlashProof design addresses two potential problems that may occur with standard level indicators: boiling fluids and flashing vapors.  By employing a larger 3″ Schedule 40 pipe and two internal guide rods, entrained gases that build up under the float can harmlessly escape.  The float is held to one side of the chamber to insure an optimized magnetic field in close proximity to the indicator, transmitter or switches.  This provides an accurate float level and indicator reading. The Jerguson FlashProof design also addresses problems caused by dirty or viscous services.  The use of an oversized 3″ Schedule 40 chamber creates additional space to prevent the float from binding when dirt, sludge, or wax-like solids are present in the process fluid.  In a standard gage dirty service could potentially bind the float, causing the level to appear unchanged.  Additionally, the bypass zone allows for the gage to be flushed without removing the float from the column. Specification Overview Larger diameter chamber with float guides Complies to ASME B31.1 and ASME B31.3 Available with full range of Jerguson indicators, transmitters, and switches 3″ Schedule 40 pipe chamber as standard Schedule 80 and 120 available for high pressure applications Size Range from 12″ to 240″ vessel centers Specific Gravity Minimum: 0.36 Pressure class rating up to 1919 PSIG (132BarG) @ 100° F (37°C), as per ASME B31.3 Temperature Range: -325°F to 1000°F (-198°C to 538°C)"
View Details
Jerguson JMT Series Magnetostrictive Transmitter

Jerguson JMT Series Magnetostrictive Transmitter

JMT

The JMT Series magnetostrictive transmitter represents a significant advancement in level measurement technology. The integration of Jerguson’s signal capture technology sets it apart with its superior signal-to-noise ratio, ensuring highly accurate level readings even in challenging environments. The dual-entry enclosure design enhances its functionality by offering both safe and convenient access to the HMI on the front and easy access to power connections in the back. The HMI enhances user interaction by offering instant access to vital information, such as current level readings and device settings, all at the touch of a button. The real-time waveform graph is an especially useful tool for monitoring and diagnostics, offering a visual representation of the process in action. Compatibility with HART 7 makes the JMT highly versatile and easy to integrate into existing systems, facilitating seamless communication and control. The transmitter is also designed with user-friendliness in mind, from installation to setup, ensuring that it can be quickly and efficiently deployed in various applications. In line with Jerguson’s reputation for reliability, the JMT complements our established range of flag indicators, floats, and switches, adding a robust solution for continuous level control.                                                     4-20 mA loop powered; 12.5 to 36VDC HART Protocol Communication NEW! HART 7 Sensing lengths from 12 inches (305mm) to   360 inches (9 meters) Process Temperature -300ºF to 700ºF (-185ºC   to 372ºC) (Insulation Safeguards Required over   350ºF [176ºC]) - Gage Mount Process Temperature -32ºF (-35ºC) to 285ºF   (140ºC) - Tank Mount Dual Float Functionality (Interface and   Total Level) ETL approved for USA, Canada, ATEX and   IECEx (Explosion/Flame Proof, Intrinsic Safety) Dual Compartment NEMA 4X; IP66 Enclosure Epoxy Coated Aluminum Standard 316SS optional One-Touch Waveform Graphical Display
View Details
Jerguson SAS-16 Switch

Jerguson SAS-16 Switch

SAS-16

The switch mechanism is based on a unique Jerguson tri-magnet design where the snap action is accomplished by the utilization of magnetic repulsion.  The magnet mounted in the float causes the secondary magnet to rotate as it passes up and down. The switch magnet is repelled by the secondary and snaps to the opposite side. This causes the cradle to pivot, moving the push rod which operates the switch contacts.  The result is positive snap action interlock switching – no springs…no cams…no problems. Externally Mounted – No Contact with Fluid Process Suitable for Applications up to 750ºF! Fully Adjustable Switch Post Highly Resistant to Vibration SPDT (Single-Pole Double-Throw) Standard Anodized Aluminum Enclosure; Available in 316 Stainless Steel FM Approved with IECEx and ATEX versions available  
View Details
Jerguson MGWRS Single Chamber Redundant Level Instrument

Jerguson MGWRS Single Chamber Redundant Level Instrument

MGWRS

Guided Wave Radar – Dielectric Based Level Measurement. Various GWR manufacturers available based on customer preference. On-board electronic module sends low-power microwave pulses down the GWR probe which are reflected by the process media. Time of flight is measured to determine the process level. Measurement independent of density, conductivity, dielectric constant, and temperature Models available for interface applications; both total and interface level can be provided with one HART signal Measurement unaffected by foam or turbulent surfaces Models available with compensation for steam applications Various GWR manufacturers available based on customer preference                                                              MGWRS – Single Chamber Design                                                                                                                                                                   A slotted internal baffle plate provides separate compartments for the float and GWR probe in a single chamber Compact design minimizes space requirements and potential weight concerns Baffle plate provides inherent benefits of reducing the effects of flashing or plugging with build-up in heavy particulate media Variety of custom arrangements available True redundant level technologies
View Details
Jerguson MGWRD Dual Chamber Redundant Level Instrument

Jerguson MGWRD Dual Chamber Redundant Level Instrument

MGWRD

Guided Wave Radar – Dielectric Based Level Measurement. Various GWR manufacturers available based on customer preference. On-board electronic module sends low-power microwave pulses down the GWR probe which are reflected by the process media. Time of flight is measured to determine the process level. Measurement independent of density, conductivity, dielectric constant, and temperature.                 Models available for interface applications; both total and interface level can be provided with one HART signal Measurement unaffected by foam or turbulent surfaces Models available with compensation for steam applications Various GWR manufacturers available based on customer preference.                                                                         MGWRD – Dual Chamber Design                                                                                                                                                     Separate Magnetic Level Gage and GWR chambers Ability to add valves to independently isolate either device while maintaining operations Arrangements available with process connections off either device Reduces potential for build-up in heavy particulate media FlashProof designs available for flashing or dirty service True redundant level technologies  
View Details
Jerguson Mini-Magnicator light duty industrial level device

Jerguson Mini-Magnicator light duty industrial level device

Mini-Mag

Models Beginning With: MII-15B. The Mini-Magnicator is specifically designed for the light duty industrial market. These versatile and economical level devices can be utilized in a variety of applications. How It Works: The Magnetic Level Gage chamber contains a float, with magnets, that rises and falls as liquid level changes in the storage vessel. The float is magnetically coupled to the external indicator, whose flags rotate to indicate level, as the float travels by. The updated design utilizes the Jerguson patented magnetic arrangement for superior reliability. The Magnet Matters! Jerguson uses a unique float construction with 360 degree ring magnets with north poles opposing. This yields a strong focused magnetic field which eliminates skipped flags and provides reliable activation of switches and transmitters. Features: Superior visual level indication from extended distance – Wide Indicator standard (flags with integral magnets) NEW! Float design can now operate reed switches and various transmitters Shock and vibration resistant Considerable upgrade for armored or tubular glass with – Less maintenance and leak paths Easy Installation Economical means for level indication Construction to ASME B31.3 std. / B31.1 optional Custom Engineered designs.                                                                                                                                                   Specifications: 1.5"" Sch 10 Chamber Max Pressure: 475 psig (32.7 barg) Max Temp: 650°F (343°C) S.G. Down to .59 Flange Class: 150# and 300# Materials of Construction: All 316SS, All 304SS, 316 or 304 with CS trim Visible Range: 1' – 18.5' NACE MR0103/0175 (Consult M100.30 Magnicator Specification Guide for configuration selection)
View Details
Jerguson External Cage Float Operated Magnetic Level Switch

Jerguson External Cage Float Operated Magnetic Level Switch

ECLS

Jerguson® External Cage Float Operated Magnetic Level Switch.                                                                                       Features Tri-Magnet Switching Vibration Resistant Weatherproof Flameproof Sealed (shown) or Flanged Cage Body 316 SS Trim ASME B31.1/B31.3 Design                                                                                                                                                                 Operation The float drives a stainless steel sheathed permanent magnet attached to the float rod in the glandless pressure tube.  As the float rises and falls with a changing liquid level the float assembly moves upwards inside the pressure tube. ?A switch mechanism is mounted inside the enclosure adjacent to the pressure tube, and is activated by the rising or falling magnet. ?The vertical movement of the float magnet in the pressure tube simultaneously actuates the secondary and switch magnets within the switch mechanism, to operate the contacts.  This “three-magnet” system enables the float magnet to pass the switch and actuate switch mechanisms at other levels.  Switch mechanisms which are actuated will not reset until the float magnet actuates the switch mechanism on a falling level. ?Switching is achieved with the unique tri-magnet snap-action switch system.  
View Details
Jerguson 20 Series Medium Pressure Glass Level Gage

Jerguson 20 Series Medium Pressure Glass Level Gage

20-Series

Medium Pressure Glass Liquid Level Gages                                                                                                                              Features                                                                                                                                                                                                     Recessed Gasket Seat in Chamber and Cover Tempered Borosilicate Glass conforming to BS3463, JIS B8211, and DIN 7081 Wetted Parts conform to NACE MR0175 and MR0103 All parts listed in ASTM and ASME B31.3 ABS Certified Carbon Steel Covers are Shrouded to Protect the Glass Edges All Gages feature a continuous, one-piece chamber regardless of length                                                                               The Jerguson Series 20 Glass Gage is the most common gage produced and will cover 80-85% of the applications encountered. Important features include a recessed gasket surface (standard on all gage series) and shrouded covers.  A recessed gasket surface provides positive location of the seal gasket during both assembly and field repair and also makes it possible to repair a Jerguson glass liquid level gage while it is mounted to the vessel.  The recessed gasket surface is also an important safety feature in the fact that it contains the gasket and helps prevent lateral movement which could lead to a gasket blow-out (as with competitive gages.)
View Details
Jerguson LumaStar Illuminator

Jerguson LumaStar Illuminator

EPL100

LumaStar™ Illuminator – Model EPL-100                                                                                                                                     Jerguson® LumaStar™ Illuminators’ white LED design combines long-life performance with superior visibility for hazardous locations. Jerguson’s Model EPL-100 is approved for use in Class I, Div 1, Group B, C and D and Zone 1 and 2 environments and available in sizes up to 58″ long with a single power supply. That means a four section size nine or five section size seven gage from a single power supply at less than 250 mA! Contact your local representative or a Jerguson Applications Engineer to configure an EPL-100 for your transparent glass level gages.     High Contrast Superior Visibility Day or Night Maintenance FREE Long Life ~100,000 hrs. No Heat Generation Field Upgradable Fits any glass gage! Eliminates “bulb-changes” Longest Field-of-View Covers up to 4 Size 9 Gage Sections or 5 Size 7 Gage Sections Explosion-Proof Power Supply, Intrinsically Safe Lighting Circuit Pays for itself in electricity savings alone!
View Details
1 - 9 of 1998
12345Next