close
Filter By
Company
Ambient Temperature
Material Spec
Size
Actuators & Controllers
17 items
ER2000 Electronic Controller
2183
The Clorius ER 2000 electronic controller is used for constant temperature control. It is suitable for all heating and cooling control systems. The controller is primarily intended for marine installations and other industrial applications – such as cooling water and lubricating oil installations, flow temperature control etc. Design The ER 2000 controller is designed for panel mounting. For an easy start-up, it has optimization for the automatic determination of favourable control parameters. The optimization starts when changing the set point or when switching over from manual mode to automatic control. The optimization can be disregarded. For easy operation, it has three keys – two for scrolling or changing values and an enter key. Two digital displays show the process variable and the setpoint. 3 LEDs indicate actuator opens, actuator closes and alarm. The controller can be switched from auto mode to manual mode. In manual mode, the actuator can be opened, closed or stopped in a certain position. Three different alarm settings are possible: Alarm at a deviation from the setpoint SP Alarm at a fixed limit value Alarm at leaving a band around the setpoint SP It can operate either as a three-position or as a two-position controller or analogue (4-20 mA) controller and has an adjustable proportional band, integral action time and derivative action time. Function The temperature input comes via a Pt 100 sensor with a single sensing element. The measured value of the controlled variable is compared with the setpoint value and adjusted via a PI or a PID control structure. The ER 2000 can act as either a heating controller, the actuator closes at rising temperature, or as a cooling controller, the actuator opens at rising temperature. The ER 2000 permits direct reading of the actual temperature value (PV), and it is secured from failure in the measuring circuit, i.e. the controller can be set to give either a closing, an opening, or remain in current position command in case of sensor short circuit or sensor break. The error message Err appears in the LED display PV.
- USD
PPx/EPx Pneumatic Positioners
2209
The Clorius PPL/PPR and EPL/EPR series are rugged control devices that stand up to harsh environments and engineered to meet the highest and most demanding control performance that the process industries of today require.
- USD
SG80 Pneumatic Controller
2216
The AMOT SG80 Pneumatic Controller is used for pressure or temperature control in pneumatic valve systems. This complete stand-alone controller offers an excellent dynamic response for proportional or proportional and integral control forms.
- USD
SIPART PS2 Valve Positioner
3734
The SIEMENS SIPART PS2 is a widely used positioner for linear and part-turn actuators in an extremely diverse range of process industries. The proven all-round talent provides comprehensive functions “ including intelligent diagnostics “ and can optionally communicate using HART 7, PROFIBUS PA 3.02 or Foundation Fieldbus ITK 6.0. A product that has been tried and tested so many times is always the right choice. The Siemens SIPART PS2 valve positioner is optionally available with Makrolon, aluminium, stainless or flameproof steel enclosure. The positioner is well-equipped for all ambient conditions. Available as standard with IP66 or NEMA 4x protection, it defies even challenging application environments. In dialogue with host systems, the vale positioner demonstrates its communicative side. It can be integrated into the most diverse communication landscapes using the PROFIBUS PA, Foundation Fieldbus or HART protocols. Furthermore, SIMATIC PDM can be applied with HART and PROFIBUS PA to clearly display and document saved trend values, histograms, and commissioning and operating data. The SIPART PS2 is equipped as standard with comprehensive diagnostics functions. To provide a warning of costly failures during operation, the positioner permanently checks the actuator and valve. The SIPART PS2 valve positionercommunicates ongoing events in real-time following NE107. Additionally, the SIPART PS2 provides diagnostics functions such as the œValve Performance Test (VPT). Using this test, the state of a valve can be assessed during a planned plant standstill. The diagnostics package of our positioner is rounded off by the œFull Stroke Test (FST), Step Response Test (SRT), and œMultistep Response Test (MSRT). The diagnostics cockpit allows users to obtain a clear introduction and quickly assess the state of a valve. With a regular œPartial Stroke Test (PST), the SIPART PS2 ensures that ESD (Emergency Shut Down) valves and other open/close valves remain free to move in emergencies. The positioner can also test the attached solenoid valve. The partial stroke test can be used for control valves to recognize maintenance requirements at an early stage during the ongoing process. Fail in place, and our multi-talent also provides fail-safe functions. The fail in place function causes the valve to remain in the last position should the power supply fail. Alternatively, the fail-safe function makes sure that the valve moves to the safety position. This function is even suitable for use in SIL2 measuring circuits. Siemens all-rounder can do even more: together with the SIPART PS2 booster; it allows fast control of large actuators with a Cv value of 2.0. Due to direct mounting on the positioner, the manual piping requirements are reduced to a minimum. Our positioner's numerous functions have made it what it is today: a multi-talent that can optimally handle a wide spectrum of specific challenges.
- USD
Safety Set SM6
9147
The Clorius Safety Set SM6 is developed for all Clorius valves up to 150mm but may be used for other valve brands of corresponding size and function. It is consequently well suited for the modernisation of existing systems. The Clorius Safety Set SM6 is used for heating, cooling, ventilation and industrial systems, no matter whether the medium is water, steam or oil. Design The Clorius Safety Set SM6 consists of a valve motor, a control box and a dual thermostat. A gear motor drives the valve motor. Stepping motor with SUT (Superior Universal Technology) electronic control unit and electronic load-dependant cut-off. The valve motor is delivered for 24 V AC/DC. The build-in spring return ensures a closing time of max. 4 sec. By temperatures higher than 130ºC, a cooling unit (1-0152285) is to be mounted between valve and motor. All gear wheels and bearings are lifetime lubricated. Maintenance-free gear unit made of sintered steel; gearbox base-plate made of steel. The spring return is released when the power disappears from the holding coil, closing the valve completely. A timer in the control box ensures that the motor is not turned on again before 10 sec. after a spring return release. This function protects against starting the motor before the spring return function has terminated. The control box contains: 230/24 V AC transformer for the valve motor 10 sec. timer for the spring return Potential free alarm switch Terminal blocks for connections to the valve motor, the dual Thermostat, other safety equipment, an alarm, and power Build-in fuse protecting against overload and short-circuiting The dual thermostat is set to the normal close-down temperature, e.g., 90ºC, where the valve is to be closed. It further includes an overheating thermostat for spring return emergency close-down at 105ºC. This ensures correct function, even if, e.g., the normal thermostat should fail. For additional safety, the overheating thermostat has to be reset manually after a break.
- USD
CAR-series Rotary Actuator
9151
The Clorius electric CAR-series rotary actuator is specially designed to meet the demands of the powerful low-frequency vibration environments in marine installations. The main applications for the CAR valve actuator are cooling of freshwater, seawater and lubricating oil systems for main and auxiliary engines. The actuator is used for Clorius 2 or 3-way valves type L3FM-T , M3FM-T, G3FM-T and S3FM-T .
- USD
AVF234S Linear Actuator
9155
The Clorius AVF234S linear actuator is to be used for two or three-way control valves. For controllers with continuous output (0¦10 V or 4¦20 mA) or switching output (2-point or 3-point control). For applications where a fail-safe function is required.
- USD
AVM321S / AVM322S Linear Actuator
9159
The Clorius AVM321S / AVM322S Linear Actuator is built for the actuation of 2 and 3-way valves. For controllers with constant output (0…10V or 4…20mA) or switching output (2-point or 3-point control). Automatic adaptation to the valve, optimal operator convenience, precision control and high energy efficiency with minimal operating noise. Features: BLDC motor (brushless DC) with SUT (Superior Universal Technology) electronic control unit of the third generation and electronic load-dependent cut-off. Automatic detection of applied control signal (continuous or switching), operating display with bi-colour LED. Automatic adaptation to the stroke of the valve, between 10 and 20 mm. Low operating noise. With the built-in absolute distance measurement system, the position is always maintained in the case of power failure. The direction of operation, characteristic (linear/equal percentage), positioning time and control signal (voltage/current) can be adjusted via coding switches. Integrated forced operation can be set via coding switches (with selectable direction of operation). Easy re-initialisation using a coding switch. Crank handle for external manual adjustment with motor cut-off. Simple assembly with valve; spindle is automatically connected after control voltage is applied. Numerous adapters enable the unit to be fitted onto non-Clorius valves. Electrical parallel operation of five actuators. Parameterisation option via the BUS interface. Three-piece housing made of flame-retardant yellow/black plastic and seals with type of protection IP54. Maintenance-free gearbox made of plastic; threaded spindle and gearbox base-plates made of steel. Patented drive-valve coupling. Mounting column made of aluminium. Fixing bracket made of cast light alloy for valve fitting with 20 mm stroke and made of plastic for valve fitting with 10 mm stroke. Electrical connections (max. 1.5 mm²) with screw terminals. Two break-out cable inlets for metric cable glands made of plastic M20 × 1.5
- USD
AVM321 / AVM322 Linear Actuator
9163
The Clorius AVM321 / AVM322 Linear Actuators are built for the actuation of 2 and 3-way valves. For controllers with switching output (2-point or 3-point control). Automatic adaptation to the valve, optimal operator convenience, precision control and high energy efficiency with minimal operating noise. Features: Synchronous motor with electronic control unit and load-dependent cut-off Direction of operation and positioning time can be set using coding switches Crank handle for external manual adjustment with motor cut-off Very low operating noise Simple assembly with valve; spindle is automatically connected after nominal voltage is applied Electrical parallel operation of 5 actuators
- USD