close
Filter By
Company
Ambient Temperature
Connection Type
Insertion Length
IP Rating
Material Spec
Nominal Size
- 60 mm__72 x 72 mm 2
- 100 mm 4
- 100 mm__50 mm__63 mm__80 mm 1
- 100 mm__60 mm__72 x 72 mm__80 mm__96 x 96 mm 1
- 100 mm__60 mm__80 mm 1
- 100 mm__63 mm 1
- 100 mm__127 mm__160 mm__80 mm 1
- 100 mm__160 mm 3
- 100 mm__160 mm__25 mm__33 mm__40 mm__50 mm__63 mm__80 mm 1
- 100 mm__160 mm__63 mm 2
- 100 mm__160 mm__63 mm__80 mm 2
Temperature Range
Thermometers
32 items
TGT70 Expansion Thermometer
3206
At any point where the process temperature must be displayed locally, and there is a requirement to simultaneously transmit the signal to a central controller or remote control room, the WIKA TGT70 intelliTHERM® can be used. Through the combination of a mechanical measuring system and precise electronic signal processing, the process temperature can be read securely, even if the power supply is lost. The built-in Bourdon tube system generates a rotational pointer movement that is proportional to the temperature. An electronic angle encoder (non-contact, and therefore completely free from wear and friction) determines the position of the instrument pointer. From this, the electrical output signal, proportional to the temperature, is produced. The basis of the intelliTHERM® comes from instrument variants derived from WIKA's model 70 expansion thermometer.
- USD
TGT73 Gas-actuated Thermometer
3209
Wherever the process pressure has to be indicated on-site and, at the same time, a signal transmission to the central control or remote centre is desired, the WIKA TGT73 intelliTHERM® can be used. Through the combination of a mechanical measuring system and electronic signal processing, the process temperature can be read reliably, even if the voltage supply is lost. Due to the wide variety of possible designs, the WIKA TGT73 gas-actuated thermometers can be perfectly adapted to any process connection or location. With the adjustable stem and dial version, the case can be adjusted precisely to the desired viewing angle. With the contact bulb version (without direct contact with the medium), the temperature can be measured and controlled even when the pipe diameter is extremely small. The electronic WIKA transmitter, integrated into the high-quality mechanical temperature measuring instrument, combines the advantages of electrical signal transmission with the advantages of a local mechanical display. The measuring span (electrical output signal) is adjusted automatically with the mechanical display, i.e. the scale over the full-scale range corresponds to 4 … 20 mA. A 4 … 20 mA version is available for use in hazardous areas.
- USD
A46 Bimetal Thermometer
4222
The WIKA A46 bimetal thermometer is mainly used in the heating, air-conditioning and refrigeration equipment to monitor the process temperature. The bimetal thermometers are screwed with thermowells in the respective application. On the one hand, this protects the instrument; on the other hand, the measuring instrument can be exchanged without prior emptying of the heating circuit.
- USD
Model 52/R52 Bimetallic Thermometer
4225
The WIKA A52, R52 bimetallic thermometers are the entry-level model among process thermometers. The target markets of this thermometer are air-conditioning and machine building. WIKA's A52, R52 are manufactured in accordance with EN 13190 and already offer a stainless steel case and accuracy class 1 for nominal sizes > 60 mm. Especially noteworthy is a large number of stem lengths and nominal sizes. This enables the individual adaptation to the target applications.
- USD
IR267 Mini Infrared Thermometer
5356
The Extech IR267 compact non-contact InfraRed (IR) thermometer measures up to 1112ºF (600ºC) with a built-in laser pointer to identify a target area and improve aim. The type K input allows for high-temperature measurements up to 1832°F (1000°C). Built-in temperature sensor also measures Air Temperature. Adjustable emissivity feature allows for higher accuracy when measuring temperature on various surfaces.
- USD
GA-type gas actuated thermometers
7057
- USD
TG53 Bimetal Thermometer
7124
The WIKA TG53 bimetal thermometer has been developed and manufactured in accordance with the ASME B40.200 standard. The thermometer provides high quality and performance and is an ideal choice in the process industries. The robust, hermetically sealed case with standard IP66 (NEMA 4X) ingress protection enables use within harsh external conditions. Specifically designed for use in the chemical and petrochemical, oil and gas, power engineering and shipbuilding industries, the WIKA TG53 satisfies the rigorous requirements for resistance to aggressive media. As an available option, the case, stem and process connection can be made from 316 stainless steel. The WIKA TG53 offers the widest variety of dampening options in the industry, allowing it to operate in situations where severe vibration conditions exist. These options include case filing, and a dampened packed bearing to minimize pointer oscillation. An easily accessible reset screw on the back of the case allows quick, limited reference temperature adjustment, reducing maintenance and re-calibration costs. The TG53 is also available in an assortment of stem lengths (insertion length L1) to optimize its application-specific fit and performance.
- USD
A48 Bimetal Thermometer
7129
The WIKA A48 bimetal thermometer has been specifically developed for use in air-conditioning and refrigeration technology for measuring the temperature in air ducts. Due to the flexibly adjustable flange, the thermometer can be adapted to all standard wall thicknesses of pipe insulations.
- USD
Industrial Thermometer Type 271B
969
The original SIKA Industrial Thermometer model 271B in a high-quality V-shaped aluminium casing polished smooth on all sides, anodised in gold colour. The display area numbers are imprinted in black on the right-hand scale, underneath the anodic coating. This ensures indelible, durable print locked inside the anodised layer. SIKA's thermometers are available as standard in three nominal sizes, with each in straight, 90° or 135° versions and a variety of display ranges from -30…50°C to 0…600°C. Besides, SIKA provides immersion tubes in brass, steel, stainless steel, special brass or copper-nickel alloy, and a variety of optional connection types and threads
- USD