close
Filter By
Company
Monitors
7 items
Multiplex Monitor
2618
The QMI Multiplex monitor Provides rapid 500 millisecond response times when the detectors are correctly mounted. The Multiplex monitor Can monitor up to 12 detection points simultaneously and can be installed in the engine control rooms or on the bridge away from danger zones without a single problem. The Multiplex monitor do not require a pressure regulator or heater to deal with condensation or clean compressed air. The Multiplex screen also features an early warning and central alarm together with an engine shut/slow down facility.
- USD
Engine detector
2622
The QMI Engine Oil Mist Detector systems can be used with most engines.The detectors provide true oil mist readings in mg/l, and daily readings on all channels can be logged to provide an engine health check.
- USD
Smart Cell Bilge Alarm
2741
By utilising the œSmart Cell Detector Array Technology, developed by Rivertrace, the OCM analyses all three oil types (HFO, Diesel and Emulsions) simultaneously without the need for re-calibration. A manual cell cleaning device is included as standard to enable routine maintenance easily. A manual cell cleaning device is included as standard to enable routine maintenance easily. Optical cell fouling is recognised as a leading cause of monitor malfunction or incorrect reading. By simple operation of the manual cleaning device, the Smart Cell remains in optimum operating condition. Replacement calibrated measuring cells can be purchased for easy change overboard the vessel, and calibration verification kits enable the crew to demonstrate the monitor is within factory calibration to PSC Surveyors. The Smart Cell Bilge Alarm is readily available as a 5ppm version if required. It can also be tailor-made for Hazardous Environments (Zone 1 and 2) as an Exd system with Auto Clean, enclosed in an explosion-proof cabinet. Flow switch The flow switch option has been designed to ensure that bilge water flows through the measuring cell when monitoring mode. An error is shown on the display if there is no flow. The flow switch monitors the flow of water through the cell. This ensures that the flow cannot be shut off accidentally or maliciously. In the case of no flow, the Smart Bilge will close the overboard discharge valve.
- USD
Smart ODME
4239
The Rivertrace Oil Discharge Monitoring Equipment (Smart ODME) is designed to provide means of monitoring, recording and controlling the ballast discharge for crude oil, product and chemical tankers including ICE class vessels. The ODME system is modular in construction and does not require the usual pump/motor bulkhead penetration as used on older systems. The Smart ODME includes all components required to meet MEPC 108(49) and the latest MEPC 240(65) for Bio Fuels, effective 1 January 2016. The Smart ODME incorporates a ˜simulation mode™ to aid system demonstration to PSC surveyors, is designed for ease of retrofitting, operation, installation and maintenance. Discharge limits are set at 30 litres of Oil per nautical mile or 1 / 30,000 of the previous cargo for slop and wash water discharges.
- USD
Combined Oil Condition & Moisture Sensor
5418
The CMT Combined Oil Condition and Moisture Sensor goes beyond the usual protection systems. The Combined Oil Condition and Moisture Sensor is a permanent sensor for the continuous determination of the oil condition, humidity and temperature in hydraulic and lubricating oils. It permanently monitors dissolved water, temperature and oil quality at the same time. It puts you in control of your lubricant. Prompt information is given on changes in the fluid, allowing immediate actions in deteriorating operating conditions. Monitoring of changes in hydraulic fluids and lubricants are essential for condition-based maintenance. Data is continuously evaluated. In that way, deterioration and changes in the oil (e.g. water leakage, oil change, …) can be indicated. Through this, damage can be recognized or completely avoided at an early stage. This offers the opportunity to prevent machine failures as well as to prolong maintenance and oil change intervals using appropriate measures. Furthermore, by monitoring the lubricant, correctly performed maintenance work and the use of the required lubricant quality may be documented. Supplied with a standard ¾œ thread, it can easily be integrated into a return line or the tank. The sensor is in the position to issue sequential three analogue outputs (4…20 mA) available for dissolved water, temperature and oil quality. The sensor records the change in temperature, relative oil humidity and relative permittivity of the fluid. The sensor can evaluate condition changes automatically. If needed, three alarms for moisture, permittivity, and temperature can be set and communicated via analogue output (4…20 mA).
- USD
Electronic Inclinometer
8318
In July 2019, the IMO decided to equip all newly built container ships and bulk carriers with electronic inclinometers (with performance standards according to Resolution MSC.363(92)) mandatory. The Hoppe Electronic Inclinometer can measure the actual heel angle and determine the amplitude of the rolling oscillation of the ship over a range of ± 90°. Furthermore, it can measure the time between the maximum values of the rolling oscillation and determine the roll period over a specific range. It provides all data with sufficient accuracy for a proper assessment of the ship™s dynamic situation. In a reliable form, the Hoppe Electronic Inclinometer: Determines the actual heel angle of the ship Determines the roll amplitude of the vessel Determines the roll period of the vessel Presents all relevant information on a single display The Hoppe Electronic Inclinometer can be interfaced directly to the VDR (NMEA 0183 $–HRM) and provides additional interfaces to the Bridge Alarm Monitoring System and the Central Dimming System.
- USD
Triplex Monitor
931
The QMI TRIPLEX Monitor system is simple to install on new or existing vessels. The TRIPLEX Monitor is a user-friendly detection system, which means that the TRIPLEX Monitor is easy to install, easy to be read, and comes with detectors that can be placed over 100 meters away from the monitor. All additionally delivered sensors are calibrated and interchangeable. For all features click on product information.
- USD
1 - 7 of 7
1