close
Filter By
Company
Gas Detection
5 items
Gas Detector Tubes
1213
The GASTEC system “ fast, easy and safety measurement of hazardous materials. The detector tube method permitts a simple, quick, and economical analysis at the working site. The Gastec standard detector tube system consists of the GV-100 gas sampling pump and gastec standard detector tubes. They can analyze a wide range of gases and vapors accurately, quickly and easily. The tubes are also very easy to store because of their long shelf life of nearly 3 years.
- USD
Fixed Flow Regulator
4117
The SEMA Gases Fixed Flow Regulator for 34ltr, 58ltr, and 110ltr are available for portable detectors with no pump or hand pump. The Fixed Flow Regulators are also ideal for fixed head detectors. Ask our product specialist for more information or specifications.
- USD
Demand Flow Regulator
4122
The SEMA Gases Demand Flow Regulators for 34ltr, 58ltr, and 110ltr is designed to be used with instruments that utilize a pump to draw calibration gas. Ask our product specialist for more information or specifications.
- USD
Gas Sampling Bag
7378
The SEMA Gases gas sampling bags are ideal for taking gas monsters for further testing or analysing. All our SEMA Gases gas sampling bags are available in three different colourways; green, orange and black.
- USD
Calibration Gas Cylinder Recycler
7381
The Air Products calibration gas cylinder recycler tool allows used non-refillable cylinders to be punctured and safely recycled. In the European Union, punctured non-refillable cylinders can be recycled through the regular waste stream as nonhazardous. Outside of the European Union, the relevant local authority should be consulted. Once punctured, non-refillable cylinders no longer need to be transported as dangerous goods, which reduces transport costs. Instructions and safety precautions Safety glasses should be worn at all times when using the recycler. Before puncturing, the cylinder must be empty. It is recommended that EIGA IGC document 30 Disposal of Gases is followed before puncturing. The operator should be familiar with the properties of the gas as described on the safety data sheet, paying particular attention to safety and environmental data. The tool should be fixed to a stable surface using two M6 bolts (not supplied). Place the empty cylinder centrally in the recycler tool and wind the handle slowly clockwise until the bottle is fully pierced. As a precautionary measure, it is advisable to carry this out in well-ventilated area such as a fume cupboard or outdoors. The handle should now be wound slowly anti-clockwise to release the cylinder from the tool. The cylinder can then be recycled or disposed of by the preferred method.
- USD
1 - 5 of 5
1