DN40...DN200 - DN100...DN800

The AMOT Model B thermostatic 3-way control valves are available in a wide selection of sizes and settings to fill many fluid temperature control requirements. The model B thermostatic control valve may be mounted in any position and use the proven expanding wax principle to actuate the 3-way temperature element assemblies. The model B valves can be used for diverting or mixing service. The AMOT thermostatic valve is a very economical temperature limiting valve for engine and lubricating oil cooling and prevents scalding in-home, motel or hotel hot water supply systems. Radiant heating systems can use these valves in limiting water temperature to avoid surface cracking and over-heating of plastic piping. Other applications include electronic and battery cooling circuits, pump temperature relief valves etc.

The Clorius S3FM-T is a three-way control valve with a slide for quarter-turn operation, designed for most industrial fluids and aggressive media. The valve body and the valve slide are made of stainless steel AISI316. The valve flanges are drilled according to EN 1092-2. Optional: ANSI, JIS and Grooved Victaulic Joints. Valves can also be supplied in AB-Left configuration and AB-Middle. The slide is firmly connected with the actuator spindle. When the slide is in the one outer position by turning the spindle, connection A-AB is fully open and connection B-AB is fully closed. In the other outer position, connection A-AB is fully closed, and connection B-AB is fully open. In the intermediate positions, the opening degrees change proportionally. The valve has a minimum gap between the body and slide. To minimize the leakage, an O-ring is mounted in a groove on the slide.