All Vytl Controls Group companies are now in one place! Learn more about each Vytl company by clicking into the Companies tab.

Filter Sort
close

DN32...DN40, DN25__DN32__DN40__DN50__DN65 - DN100__DN125__DN150__DN80

6 items
1 - 6 of 6
G1FB 2-way Control Valve

G1FB 2-way Control Valve

8999

The Clorius pressure-balanced G1FB 2-way control valve is designed for regulating hot water, steam and hot oil systems. Balanced valves are used in installations where the system pressure necessitates a closing force greater than available in the actuator programme for a standard single-seated valve, and where the leakage rate for a double-seated valve is unacceptable. The G1FB 2-way control valve is used in conjunction with Clorius temperature- or pressure differential regulators for controlling industrial processes, district or central heating plants or marine installations. DESIGN The valve components – spindle, seat, cone and bellow – are made of stainless steel. The bellows for balancing the pressure are fitted on the valve spindle, which reduces the force necessary for closing the valve, as the upstream pressure of the medium through the hollow valve spindle acts outside and the pressure after the valve acts inside the bellow system. The valve body is made of nodular cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The thread for the actuator connection is G1B ISO 228. The valves are single-seated. The leakage rate is less than 0.05% of the full flow (according to VDI/VDE 2174). FUNCTION Without an actuator being connected, the valve is held in an open position using a spring and the bellow system. With pressure on the spindle, the valve will close. In connection with our thermostats, pneumatic or electric actuators, the valves will close at rising temperatures. For cooling circuits, the valve can be used in conjunction with a reverse acting electric actuator. Alternatively, a reverse acting double-seated valve can be used with our self-acting thermostats. The quadratic characteristic will not cease until the flow has dropped below 4% of the full flow.
View Details
G3F Soft Seat 3-way Control Valve

G3F Soft Seat 3-way Control Valve

9071

The Clorius G3F Soft Seat 3-way control valve is designed for regulating water, lubricating oil and other liquid media. It can be mounted in the pipe system as either mixing or diverting valves. However, when mounting as a diverting valve, the pressure drop is increased, compared with mounting as a mixing valve*. The 3-way control valve is used in conjunction with Clorius temperature regulators for controlling industrial processes, district and central heating plants and marine installations. Design The valve components – seats and cone – are made of alubronze, the spindle is made of stainless steel. The valve body is made of nodular cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2 or ANSI B16.5 Class 150. The connection thread for the actuator is G1B ISO 228. The valves have two balanced single seats and are designed for tight closure. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174). [Tight between port 1(AB) og 3(B) is optional.] Function Without an actuator being installed, connection 2-1 is fully open, and connection 3-1 completely closed using a spring. By increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle, and when the spindle is pressed to the bottom, connection 3-1 is fully open and connection 2-1 completely closed.   * In case the valves are applied as diverting valves, the pressure drop will increase by 35% and the kvs-value will decrease by 14% as against mixing valves.
View Details
H3F 3-way Control Valve (DN80-DN150)

H3F 3-way Control Valve (DN80-DN150)

9079

The Clorius H3F 3-way control valve (DN80-DN150) is designed for regulating hot water, lubricating oil and other liquid media and can be mounted in the pipe system as either mixing or diverting valves. However, when mounting as a diverting valve, the pressure drop is increased, compared with mounting as a mixing valve*. The H3F control valve is used in conjunction with Clorius temperature regulators for controlling industrial processes, district and central heating plants and marine installations. Design The valve components – seats and cone – are made of alu bronze, the spindle is made of stainless steel. The valve body is made of cast steel GP240GH (GS-C25) with flanges drilled according to EN 1092-2 or ANSI B16.5 Class 150. The connection thread for the actuator is G1B ISO 228. The valves have two balanced single seats. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174). Tight between port 1(AB) og 3(B) is optional. Function Without an actuator being installed, connection 2-1 is fully open, and connection 3-1 completely closed using a spring. By increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle, and when the spindle is pressed to the bottom, connection 3-1 is fully open and connection 2-1 completely closed. * In case the valves are applied as diverting valves, the pressure drop will increase by 35% and the kvs-value will decrease by 14% as against mixing valves.
View Details
FET Diverting Filterstat

FET Diverting Filterstat

9269

The AMOT FET temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for diverting applications. The FET diverting filterstat is available in 1 ¼ and 1 ½ sizes and settings to fill many fluid temperature control requirements. The FET has a compact design and low installation cost, and flexible spin-on filter manifold, allowing customers to use filter size of their choice. As with other AMOT thermostatic valves, temperature and filter manifold uses fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. It is field replaceable and is available with temperature settings from 49°C to 113°C (120°F to 235°F). To change a valve setting, it is necessary to exchange the temperature element assembly.
View Details
FED Diverting Dual Filter Filterstat

FED Diverting Dual Filter Filterstat

9272

The AMOT FED temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for dual diverting applications. The FED diverting dual filter filterstat is available in 1 ¼ and 1 ½ sizes and settings to fill many fluid temperature control requirements. They have a compact design and low installation cost, and flexible spin-on filter manifold, allowing customers to use filter size of their choice. As with other AMOT thermostatic valves, temperature and filter manifold uses fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. It is field replaceable and is available with temperature settings from 49°C to 113°C (120°F to 235°F). To change a valve setting, it is necessary to exchange the temperature element assembly.
View Details
FE Mixing Filterstat

FE Mixing Filterstat

9275

The AMOT FE temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for mixing applications. They are available in 1 ¼ and 1 ½ sizes and settings to fill a multitude of fluid temperature control requirements. The AMOT FE mixing filterstat has a compact design and low installation cost, and flexible spin-on filter manifold, allowing the customer to use filter size of their choice. As with other AMOT thermostatic valves, temperature and filter manifold uses fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. It is field replaceable and is available with temperature settings from 49°C to 113°C (120°F to 235°F). To change a valve setting, it is necessary to exchange the temperature element assembly.
View Details
1 - 6 of 6
1