DN25__DN32__DN40__DN50__DN65 - DN50...DN100

The Clorius pressure-balanced G1FB 2-way control valve is designed for regulating hot water, steam and hot oil systems. Balanced valves are used in installations where the system pressure necessitates a closing force greater than available in the actuator programme for a standard single-seated valve, and where the leakage rate for a double-seated valve is unacceptable. The G1FB 2-way control valve is used in conjunction with Clorius temperature- or pressure differential regulators for controlling industrial processes, district or central heating plants or marine installations. DESIGN The valve components – spindle, seat, cone and bellow – are made of stainless steel. The bellows for balancing the pressure are fitted on the valve spindle, which reduces the force necessary for closing the valve, as the upstream pressure of the medium through the hollow valve spindle acts outside and the pressure after the valve acts inside the bellow system. The valve body is made of nodular cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The thread for the actuator connection is G1B ISO 228. The valves are single-seated. The leakage rate is less than 0.05% of the full flow (according to VDI/VDE 2174). FUNCTION Without an actuator being connected, the valve is held in an open position using a spring and the bellow system. With pressure on the spindle, the valve will close. In connection with our thermostats, pneumatic or electric actuators, the valves will close at rising temperatures. For cooling circuits, the valve can be used in conjunction with a reverse acting electric actuator. Alternatively, a reverse acting double-seated valve can be used with our self-acting thermostats. The quadratic characteristic will not cease until the flow has dropped below 4% of the full flow.

The AMOT 4500D is a combined temperature and pressure control valve used in applications where both temperature and pressure control are required simultaneously. The AMOT 4500D valve combines temperature control, pressure regulating and pressure relief into a single manifold valve, reducing installation costs and simplifying material planning. The valve is designed to be mounted directly on the oil tank to reducing piping. The AMOT 4500 temperature and pressure control valve has been specifically designed and developed by AMOT Controls as a pressure and temperature regulating valve for lubricating oil applications. The pilot regulates the oil pressure operated Cartridge Regulator. The pilot feed to the Regulator is taken downstream of the oil filters to sense the oil pressure. Pressure is controlled by regulating the amount of oil that is dumped through the Cartridge Regulator back to the main reservoir. The temperature of the oil is then controlled by the internally sensed 3-way temperature in the control valve. The oil flow then split between flowing through a cooler external to the valve and an internal bypass that flows directly to the thermostatic elements. The flow through the internal bypass and cooled oil returning from the cooler are mixed and regulated by the temperature elements to the desired temperature before leaving the valve. The temperature and pressure-controlled oil exits the valve and flows through the lube oil system filters before flowing to the equipment requiring lubrication.