close
Categories
Filter By
Company
Connection Type
Material Spec
Nominal Pressure
Size
- 1.5''...8.0'' 2
- 2'' pipe 1
- 2.8''...7.0'' valve size 1
- 4''__6'' 2
- 7''__ˆ… 6'' 2
- 88.90 mm x 205 mm 1
- 96 x 96 x 135 mm 3
- 110 x 32 mm 1
- 132 x 82 x 34 mm 5
- 160 mm x 62 mm 1
- 229.3 mm__ˆ… 160 mm 1
- 229.3 mm__ˆ…160 mm 1
- 235 x 75 mm 1
- 270x90x35 mm 1
- 397.5 mm__ˆ… 273 mm 1
- DN15...DN50 1
- DN15__DN20 2
- DN15__DN20__DN25...DN50 1
- DN20...DN65 2
- DN20...DN80 1
- DN20..DN32 1
- DN25 1
- DN25__DN32__DN40__DN50__DN65 1
- DN32...DN40 3
- DN40...DN200 1
- DN50 1
- DN50...DN100 1
- DN50...DN350 1
- DN50...DN400 1
- DN65...DN150 2
- DN65...DN800 2
- DN80...DN150 1
- DN80...DN300 1
- DN90...DN200 1
- DN100...DN600 2
- DN100...DN800 1
- DN100__DN125__DN150 2
- DN100__DN125__DN150__DN20...DN80 1
- DN100__DN125__DN150__DN80 2
Temperature Range
DN15__DN20__DN25...DN50, 4''__6'' - DN32...DN40
6 items
4262C Air Intake Shutoff Valve
2913
The AMOT 4262C air intake shutoff valve stops the engine in an emergency or in the event of engine runaway (overspeed). It can be actuated pneumatically, hydraulically, or electrically and a manual option is available.
- USD
7002 Air Intake Shut-Off Valve
2968
The AMOT 7002 swing gate air shut off valve is designed for the harsh wear and tear of the frac industry. It will effectively shut down a runaway diesel engine by closing off the engine intake air. The AMOT 7002 swing gate air shut off valve was specially designed for use in the Cummins QSK50 (Tier 2 and 4) high horsepower engines commonly used in: Hydraulic fracturing units Electric power generators Offshore production engines Marine engines Generator sets Locomotives
- USD
L3S 3-way Control Valve
9099
The Clorius L3S 3-way control valve is designed for regulating freshwater, cold and hot seawater and lubricating liquids. The compact L3S valve is used in conjunction with temperature regulators in control systems for cooling and heating of domestic premises, district heating, industrial processes or marine installations. The valve components – valve body, seats and cone – are made of sea-water resistant gun metal RG 5. The valves are single seated. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174). Note: The design of the sizes DN 15 (½Ë) and DN 20 (¾Ë) is different from the bigger ones. Without an actuator being connected, connection 2-1 is fully open and connection 3-1 completely closed by means of a spring. On increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle, and when the spindle is pressed to the bottom, connection 3-1 is fully open and connection 2-1 completely closed.
- USD
FET Diverting Filterstat
9269
The AMOT FET temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for diverting applications. The FET diverting filterstat is available in 1 ¼ and 1 ½ sizes and settings to fill many fluid temperature control requirements. The FET has a compact design and low installation cost, and flexible spin-on filter manifold, allowing customers to use filter size of their choice. As with other AMOT thermostatic valves, temperature and filter manifold uses fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. It is field replaceable and is available with temperature settings from 49°C to 113°C (120°F to 235°F). To change a valve setting, it is necessary to exchange the temperature element assembly.
- USD
FED Diverting Dual Filter Filterstat
9272
The AMOT FED temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for dual diverting applications. The FED diverting dual filter filterstat is available in 1 ¼ and 1 ½ sizes and settings to fill many fluid temperature control requirements. They have a compact design and low installation cost, and flexible spin-on filter manifold, allowing customers to use filter size of their choice. As with other AMOT thermostatic valves, temperature and filter manifold uses fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. It is field replaceable and is available with temperature settings from 49°C to 113°C (120°F to 235°F). To change a valve setting, it is necessary to exchange the temperature element assembly.
- USD
FE Mixing Filterstat
9275
The AMOT FE temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for mixing applications. They are available in 1 ¼ and 1 ½ sizes and settings to fill a multitude of fluid temperature control requirements. The AMOT FE mixing filterstat has a compact design and low installation cost, and flexible spin-on filter manifold, allowing the customer to use filter size of their choice. As with other AMOT thermostatic valves, temperature and filter manifold uses fully enclosed, factory-set temperature element assemblies which provide tamper-proof operation. It is field replaceable and is available with temperature settings from 49°C to 113°C (120°F to 235°F). To change a valve setting, it is necessary to exchange the temperature element assembly.
- USD
1 - 6 of 6
1