All Vytl Controls Group companies are now in one place! Learn more about each Vytl company by clicking into the Companies tab.

Filter Sort
close

DI 3...DI 15 - 50 mm__63 mm

5 items
1 - 5 of 5
PGS25 Bourdon Tube Pressure Gauge

PGS25 Bourdon Tube Pressure Gauge

3352

The robust WIKA PGS25 switchGAUGE is a combination of a Bourdon tube pressure gauge and a pressure switch. It offers the usual analogue display, which enables reading the process pressure on site, and also the possibility to switch up to two electrical signals. The switch contacts are factory-set in a range between 5 % and 95 % of the scale range. The measuring system with a bourdon tube per EN 837-1 produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. That provides a pressure-proportional signal for further processing. Depending on the switch point setting, the circuit is opened or closed when the alarm value is reached. Thus the switchGAUGE can be used actively for process monitoring, for example, to control the level of a gas cylinder or a hydraulic circuit. The switchGAUGE is available as standard in scale ranges from 0 … 1.6 bar to 0 … 400 bar with an accuracy class of 2.5 and a 1 m round cable for the electrical connection. The stainless steel case fulfils the requirements of IP65 ingress protection. The resistance to shock and vibration can be increased by the silicone oil case filling. Thus the instrument is perfectly suited for use in harsh industrial environments. Through various options (e.g. higher accuracy class, another cable length) the pressure measuring instrument can be matched exactly to the customer-specific requirements of each application.
View Details
PGT21 Bourdon Tube Pressure Gauge

PGT21 Bourdon Tube Pressure Gauge

3385

The WIKA PGT21 intelliGAUGE® is a combination of a Bourbon tube pressure gauge and a pressure transmitter. It offers the usual analogue display, which enables reading the process pressure on site, and in addition an analogue output signal (4 … 20 mA or DC 0.5 … 4.5 V). The measuring system with Bourdon tube per EN 837-1 produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. That provides a pressure-proportional signal for further processing. The intelliGAUGE® is available as standard in scale ranges from 0 … 1.6 bar to 0 … 400 bar with an accuracy class of 2.5 and a 1 m round cable for the electrical connection. The stainless steel case fulfils the requirements of IP65 ingress protection. The resistance to shock and vibration can be increased by the silicone oil case filling. Thus the instrument is perfectly suited for use in harsh industrial environments. Through various options (e.g. higher accuracy class, another cable length) the pressure measuring instrument can be matched exactly to the customer-specific requirements of each application.
View Details
SITRANS FC MASS 2100 DI 3-15

SITRANS FC MASS 2100 DI 3-15

3554

The SIEMENS SITRANS FC MASS 2100 DI 3-15 is suitable for accurate mass flow measurement for all kind of liquids and gases. The full bore design provides lower pressure loss due to the same internal diameter throughout the entire sensor. The single tube construction without internal welds, reductions or flow splitters offers optimal hygiene, safety and CIP cleanability. The sensor is also characterised by having a large dynamic turn down range better than 500:1 and the market's thickest tube wall to ensure the highest integrity. Integral heating is optionally available to avoid sensitive fluids' solidification during downtime or period between discontinuing processes. To make a complete flowmeter, the SITRANS F C MASS 2100 flow sensor must be combined with one of the following MASS transmitters: SITRANS FCT030 : For general industry applications SITRANS FCT010 : For OEMs and skids in applications where space is limited SITRANS FCT070 : For SIMATIC ET 200SP distributed I/O
View Details
611.10 / 631.10 Capsule Pressure Gauge

611.10 / 631.10 Capsule Pressure Gauge

6944

The WIKA 611.10 / 631.10 capsule pressure gauges are based upon the proven capsule measuring system. The capsule measuring principle is particularly suitable for low pressures. On pressurisation, the expansion of the capsule element, proportional to the incident pressure, is transmitted to the movement and indicated. The case of the 611.10 / 631.10 capsule pressure gauges is made from black lacquered steel with a snap-fitted window. The material of the process connection is a copper alloy with WIKA 611.10 and stainless steel with model 631.10. The modular design enables a multitude of combinations of case materials, process connections, nominal sizes and scale ranges. Due to this high variance, the instrument is suitable for use in a wide range of applications within the industry. For mounting in control panels, the capsule pressure gauges can, depending on the process connection, be fitted with a surface mounting flange or with a triangular bezel and mounting bracket.
View Details
611.13 Capsule Pressure Gauge

611.13 Capsule Pressure Gauge

6952

The WIKA 611.13 capsule pressure gauges is based upon a modular capsule measuring system. One half of the capsule element forms the plastic case, and the other half is made of copper-beryllium. The capsule measuring principle is particularly suitable for low pressures. On pressurisation, the expansion of the capsule element, proportional to the incident pressure, is transmitted to the movement and indicated. The modular design enables a multitude of customer-specific applications. The WIKA 611.13 capsule pressure gauge is used with great success, particularly in medical applications.
View Details
1 - 5 of 5
1