close
Categories
Filter By
Company
Insertion Length
- 20 mm__30 mm__40 mm__50 mm__60 mm 2
- 25...400 mm 1
- 40...400 mm 1
- 40 mm ‰¥ 5
- 50 €° 5.000 mm 1
- 50...1.000 mm 1
- 50...250 mm 3
- 50...600 mm 1
- 63...1.000 mm 1
- 73...410 mm 2
- 75...825 mm 2
- 80...300 mm 2
- 100...350 mm 1
- 100 mm__60 mm 1
- 100 mm__120 mm__150 mm__200 mm__250 mm__300 mm__350 mm__4 1
- 100 mm__150 mm__200 mm__25 mm__250 mm__300 mm__400 mm__50 1
- 100 mm__150 mm__200 mm__50 mm 1
- 150 mm__200 mm__250 mm 1
- 160 mm__250 mm__40...400 mm 1
- To customer specification 9
Temperature Range
75...825 mm - 50 €° 5.000 mm
3 items
TR10-A Resistance Thermometer
4296
The measuring inserts per DIN 43735 for the WIKA TR10-A resistance thermometers described here is designed for installation in a protective fitting. Operation without a thermowell is only advisable in particular cases. The measuring insert is manufactured from a bendable, mineral-insulated sheathed cable. The sensor is located at the tip of the measuring insert. The measuring inserts are delivered with loading springs to ensure good contact to the thermowell floor. Type and number of sensors, accuracy and method of connection can each be selected to suit the respective application. The range of applications is completed by designs without a terminal block for direct transmitter installation. Optionally, analogue or digital transmitters from the WIKA range can be installed.
- USD
TC10-K Thermocouple
4393
The measuring inserts for thermocouples described here are designed for installation in a WIKA TC10-L thermometer. Operation without thermowell is appropriate only in exceptional cases. The measuring insert is made of flexible, mineral insulated sheathed cable. The sensor is located in the tip of the measuring insert. This model is spring-loaded to ensure that the measuring insert is firmly pressed down on the thermowell bottom. Type and number of sensors, accuracy and connection method can each be selected to suit the respective application. Only correct measuring insert length and correct measuring insert diameter ensure sufficient heat transfer from thermowell to the measuring insert. Designs complete the range of applications without a terminal block for direct transmitter installation. Optionally, analogue or digital transmitters from the WIKA range can be installed.
- USD
TW70 Thermowell
7235
Each protection tube or thermowell is an essential component of any temperature measurement point. So is the WIKA TW70 thermowell. It is used to separate the process from the surrounding area, thus protecting the environment and operating personnel and keeps aggressive media, high pressures and flow rates from the temperature sensor itself and thereby enables the thermometer to be exchanged during operation. Based on the almost limitless application possibilities, there are a large number of variants, such as protection tube designs or materials. The type of process connection and the basic method of manufacture are important design differentiation criteria. A basic differentiation can be made between threaded and weld-in protection tubes, and those with flange connections. The WIKA TW70 series of protection tubes are suitable for use with numerous electrical thermometers from WIKA. These protection tubes are intended for low and medium process loads, making them suitable for use in the chemical industry, process technology and equipment manufacturing.
- USD
1 - 3 of 3
1