close
Categories
Filter By
Company
Body Material
Bonnet Type
Connection Type
- 1/4 NPT-F 1
- 1/4 NPT-F__Adapter 1/2 NPT-F__Adapter 1/2 NPT-M 1
- 1 NPT__½ NPT__¾ NPT 1
- 1 NPT__G ½ B__G ¾ B male__½ NPT__¾ NPT 1
- 2-wire 1
- 2-wire__3-wire__4-wire 8
- 2-wire__3-wire__4-wire__G ¼__G ½__G…œ__M10 x 1__M14×1.5 1
- 2x 3-wire__3-wire__4-wire 1
- 2 x G ¼ B female__2 x G ½ B male__½ NPT male 1
- 2 x G ¼ female__2 x ¼ NPT female 2
- 2 x G ¼ female__Centre distance 26 mm__In-line__Lower 1
- 2 x G½ female, lower mount (LM) 1
- 3-wire__4-wire 1
- 14 mm flats lower mount 1
- 9/16 - 18 UNF (female)__M16 x 1.5 (female)__M20 x 1. 1
- 5/8 - 18 UNF (female)__9/16 - 18 UNF (female)__G ½__M 1
- 5/8 - 18 UNF x 27 (female)__9/16 - 18 UNF (female)__ 1
- 19 mm flats__2 x G 3/8 B (male)__Back mount__Lower mo 1
- 7/16-20 UNF 2B Schrader female 1
- 7/16-20 UNF BOSS__G¼ B EN 837 1
- 22 mm flats__G ½ 1
- 25.4...49.5 mm 1
- 26.7 mm__33.4 mm__48.3 mm 1
- 40 mm__50 mm 1
- ¼ NPT female 1
- ANSI Flange__DIN Flange 1
- ANSI Flange__Flange 4
- Back connection 1
- Back mount__G ½__Lower mount 1
- Back mount__Thermowell G½ B 1
- BSP ISO 228__NPT__ DN 50 1
- Butt Weld 2
- Clamp connection per DIN 32676 / ISO 2852 / BS4825 1
- Copper alloy, lower mount (LM) G 1/4 B (male), 14 1
- DIN 11864 1
- DN 100__DN 25__DN 40__DN 50__DN 80 1
- Flange 17
- Flange__G ¼__G ¼ A__G ½ A__¼ NPT female__½ NPT 1
- Flange__G…›__G…œ 1
- Flange__Screwed 1
- Flanged 74
- G 1/4 (female)__G 1/4 (male) 1
- G 1 1
- G 1„8__G ¼ 2
- G 1„8__G ¼__M10 x 1__R 1/8__¼ NPT__…› NPT 2
- G 1¼ 1
- G 1¼ male thread 2
- G 1__G 1„8 1
- G1__G2__G¼__G½__G¾ 1
- G 1__G 2__G ¼__G ½__G…œ 1
- G1__G¼__G½__G¾ 2
- G 1__M33 x 2 1
- G1 B__G½ B__M20 x 1.5__Push-in/weld-in__½ NPT 1
- G1 female__G¾ B__M20 x 1.5 male 1
- G1-ISO 228 male 1
- G 1 male thread 1
- G1 male thread 2
- G2 2
- G¼ 4
- G ¼...G 1 2
- G¼ / H16 UNF 1
- G¼__G¼ A__G½ A__M20 x 1.5__¼ NPT female__½ NPT 1
- G ¼__G¾ 1
- G¼__G…› 1
- G ¼__SW 14 1
- G¼__SW 14 1
- G¼ A DIN 3852-E__¼ NPT 1
- G¼ A DIN 3852-E__sealing FKM/FPM 1
- G¼ B (male)__G½ B (male)__SW14__SW22 1
- G ¼ B (male)__Stainless steel 316L 1
- G ¼ B (male)__SW 14 1
- G¼ B (NS63)__G½ B (NS80, 100) 1
- G ¼ B__G …› B__¼ NPT__…› NPT 1
- G ¼ B female__G ½ B male__½ NPT male 1
- G ¼ female__G ½ female 1
- G ½ 1
- G½ 4
- G ½...G 2 2
- G ½__G¼ 1
- G ½__G¼__M20 x 1.5__½ NPT 1
- G ½__G¼__SW 14__SW 17__SW 22 1
- G ½__G¾ 1
- G½__G¾__M20 x 1.5__M27 x 2 4
- G ½__G¾__M24x2 1
- G½__G…œ__M20 x 1.5 2
- G ½__Lower mount__SW22 1
- G ½__Lower mount__SW 27 1
- G ½__SW 22 1
- G ½ B 2
- G ½ B (lower mount) 1
- G½ B (male)__Stainless steel 316L__SW 22 1
- G ½ B__¼ NPT__½ NPT 1
- G ½ B__½ NPT__½ NPT female 1
- G½ B__G¾ B male 1
- G ½ B__M20 x 1.5__½ NPT 1
- G ½ B female__G ½ B male__½ NPT male 1
- G ½ B male__SW 22 1
- G ½ B thread 1
- G½-ISO 228 male 1
- G½-ISO 228 male__G¾-ISO 228 1
- G½ male 1
- G¾ 5
- G…œ 1
- G …œ...G 1 1
- JIS flange 4
- Lower mount__¼ NPT female 1
- NS 40: G 1/8 B (male) NS 50, 63: G 1/4 B (male), 1
- Pipe adapter 1
- Rp 1/2__Rp 3/4 1
- Rp - female thread cylindrical (BSPT) 1
- Socket Weld 3
- Stainless steel 1
- Surface mounting 1
- Threaded 15
- UExSC 1
- UExUE 1
- Union End Sil Braze 9
- Union nut 1
- Via subplate with lateral female thread connection 2
Face to Face (mm)
F-Number
Height (mm)
IMPA Code
Medium Temperature
Operation Type
Pressure Range
Pressure Rating (PN)
Product Type
Size (mm)
Specification
Stem Material
Stem Type
Trim Material
Valve Type
Threaded - G¼ / H16 UNF
16 items
D-Ex Digital Pressure Gauge
4877
The SIKA D-Ex digital pressure gauge is suitable for both stationary and mobile measurement and display of pressure. The SIKA D-Ex digital pressure gauge can be used as a reference to explain the checking, adjustment and calibration of other pressure measurement devices directly on-site. High accuracy in the signal acquisition is achieved by using high-performance measuring cells with electronic linearisation of the characteristic curve. Suitable instruments are available for a wide variety of measurement tasks. Ease of use is assured by innovative design and advanced technology. All essential functions for everyday use can be selected conveniently at the press of a button. Excellent protection against dust and moisture is provided by a membrane keypad or rubber buttons. Integrated supplementary functions make our digital pressure gauges true all-rounders. Tare / Zero-Function User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range. Selectable pressure units Another feature is the large selection of pressure units. Up to 6 different units are possible “ far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is indicated on display. No conversion necessary; the desired value can be read directly. Min / Max Displays and Peak function Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.
- USD
Bronze 125 lb Globe Valve with Bronze Trim, Threaded Bonnet
111301
Globe valve 111301 has bronze body that meets ASTM B62 specification and bronze trim along with threaded connection and bonnet. These valves are made to meet the MSS-SP-80 specification. The pressure rating is 125 lb and 200 wog. Not intended for use in potable water.
- USD
Bronze 150 lb Globe Valve with Bronze Trim, Union Bonnet
112301
Globe valve 112301 has bronze body material that meets ASTM B62 specification and bronze trim along with threaded connection and union bonnet. These valves are made to meet the MSS-SP-80 specification. The pressure rating is 150 lb and 300 wog. Not intended for use with toxic gases.
- USD
Bronze 300 lb Globe Valve with Bronze Trim, Rising Stem, Union Bonnet
114301
Globe valve 114301 has bronze body material that meets the ASTM B61 specification and bronze trim along with threaded connection and union bonnet. These valves are made to meet the MSS-SP-80 specification. The pressure rating is 300 lb.
- USD
Stainless Steel 200 lb Globe Valve with Stainless Steel Trim
173307
Globe valve 173307 has stainless steel body material that meets the ASTM A351, Grade CF8M specification and stainless steel trim along with threaded connection. The pressure rating is 200 lb.
- USD
Galvanized Cast Iron Threaded Vent Check Valve
521101
Vent check valves allow for the ventilation of ballast and void tanks while preventing contamination of the tank with water or saltwater during rough seas. They offer fully approved protection against pressure buildup for the tank walls and bulkheads while liquid is loaded or unloaded from the tanks. Vertical vent checks mount directly onto the top of vent piping, while inverted vent checks mount onto the end of gooseneck pipes.
- USD
Aluminum Threaded Vent Check Valve
521101A
Vent check valves allow for the ventilation of ballast and void tanks while preventing contamination of the tank with water or saltwater during rough seas. They offer fully approved protection against pressure buildup for the tank walls and bulkheads while liquid is loaded or unloaded from the tanks. Vertical vent checks mount directly onto the top of vent piping, while inverted vent checks mount onto the end of gooseneck pipes.
- USD
Galvanized Cast Steel Threaded Vent Check Valve
521101S
Vent check valves allow for the ventilation of ballast and void tanks while preventing contamination of the tank with water or saltwater during rough seas. They offer fully approved protection against pressure buildup for the tank walls and bulkheads while liquid is loaded or unloaded from the tanks. Vertical vent checks mount directly onto the top of vent piping, while inverted vent checks mount onto the end of gooseneck pipes.
- USD
Galvanized Cast Steel Threaded Vent Check Valve, Stainless Steel Float
521101SS
Vent check valves allow for the ventilation of ballast and void tanks while preventing contamination of the tank with water or saltwater during rough seas. They offer fully approved protection against pressure buildup for the tank walls and bulkheads while liquid is loaded or unloaded from the tanks. Vertical vent checks mount directly onto the top of vent piping, while inverted vent checks mount onto the end of gooseneck pipes.
- USD