close
Categories
Filter By
Company
Connection Type
- 1/4 NPT-F 1
- 1/4 NPT-F__Adapter 1/2 NPT-F__Adapter 1/2 NPT-M 1
- 1 NPT__½ NPT__¾ NPT 1
- 1 NPT__G ½ B__G ¾ B male__½ NPT__¾ NPT 1
- 2-wire 1
- 2-wire__3-wire__4-wire 8
- 2-wire__3-wire__4-wire__G ¼__G ½__G…œ__M10 x 1__M14×1.5 1
- 2x 3-wire__3-wire__4-wire 1
- 2 x G ¼ B female__2 x G ½ B male__½ NPT male 1
- 2 x G ¼ female__2 x ¼ NPT female 2
- 2 x G ¼ female__Centre distance 26 mm__In-line__Lower 1
- 2 x G½ female, lower mount (LM) 1
- 3-wire__4-wire 1
- 14 mm flats lower mount 1
- 9/16 - 18 UNF (female)__M16 x 1.5 (female)__M20 x 1. 1
- 5/8 - 18 UNF (female)__9/16 - 18 UNF (female)__G ½__M 1
- 5/8 - 18 UNF x 27 (female)__9/16 - 18 UNF (female)__ 1
- 19 mm flats__2 x G 3/8 B (male)__Back mount__Lower mo 1
- 7/16-20 UNF 2B Schrader female 1
- 7/16-20 UNF BOSS__G¼ B EN 837 1
- 22 mm flats__G ½ 1
- 25.4...49.5 mm 1
- 26.7 mm__33.4 mm__48.3 mm 1
- 40 mm__50 mm 1
- ¼ NPT female 1
- ANSI Flange__DIN Flange 1
- ANSI Flange__Flange 4
- Back connection 1
- Back mount__G ½__Lower mount 1
- Back mount__Thermowell G½ B 1
- BSP ISO 228__NPT__ DN 50 1
- Butt Weld 2
- Clamp connection per DIN 32676 / ISO 2852 / BS4825 1
- Copper alloy, lower mount (LM) G 1/4 B (male), 14 1
- DIN 11864 1
- DN 100__DN 25__DN 40__DN 50__DN 80 1
- Flange 17
- Flange__G ¼__G ¼ A__G ½ A__¼ NPT female__½ NPT 1
- Flange__G…›__G…œ 1
- Flange__Screwed 1
- Flanged 74
- G 1/4 (female)__G 1/4 (male) 1
- G 1 1
- G 1„8__G ¼ 2
- G 1„8__G ¼__M10 x 1__R 1/8__¼ NPT__…› NPT 2
- G 1¼ 1
- G 1¼ male thread 2
- G 1__G 1„8 1
- G1__G2__G¼__G½__G¾ 1
- G 1__G 2__G ¼__G ½__G…œ 1
- G1__G¼__G½__G¾ 2
- G 1__M33 x 2 1
- G1 B__G½ B__M20 x 1.5__Push-in/weld-in__½ NPT 1
- G1 female__G¾ B__M20 x 1.5 male 1
- G1-ISO 228 male 1
- G 1 male thread 1
- G1 male thread 2
- G2 2
- G¼ 4
- G ¼...G 1 2
- G¼ / H16 UNF 1
- G¼__G¼ A__G½ A__M20 x 1.5__¼ NPT female__½ NPT 1
- G ¼__G¾ 1
- G¼__G…› 1
- G ¼__SW 14 1
- G¼__SW 14 1
- G¼ A DIN 3852-E__¼ NPT 1
- G¼ A DIN 3852-E__sealing FKM/FPM 1
- G¼ B (male)__G½ B (male)__SW14__SW22 1
- G ¼ B (male)__Stainless steel 316L 1
- G ¼ B (male)__SW 14 1
- G¼ B (NS63)__G½ B (NS80, 100) 1
- G ¼ B__G …› B__¼ NPT__…› NPT 1
- G ¼ B female__G ½ B male__½ NPT male 1
- G ¼ female__G ½ female 1
- G ½ 1
- G½ 4
- G ½...G 2 2
- G ½__G¼ 1
- G ½__G¼__M20 x 1.5__½ NPT 1
- G ½__G¼__SW 14__SW 17__SW 22 1
- G ½__G¾ 1
- G½__G¾__M20 x 1.5__M27 x 2 4
- G ½__G¾__M24x2 1
- G½__G…œ__M20 x 1.5 2
- G ½__Lower mount__SW22 1
- G ½__Lower mount__SW 27 1
- G ½__SW 22 1
- G ½ B 2
- G ½ B (lower mount) 1
- G½ B (male)__Stainless steel 316L__SW 22 1
- G ½ B__¼ NPT__½ NPT 1
- G ½ B__½ NPT__½ NPT female 1
- G½ B__G¾ B male 1
- G ½ B__M20 x 1.5__½ NPT 1
- G ½ B female__G ½ B male__½ NPT male 1
- G ½ B male__SW 22 1
- G ½ B thread 1
- G½-ISO 228 male 1
- G½-ISO 228 male__G¾-ISO 228 1
- G½ male 1
- G¾ 5
- G…œ 1
- G …œ...G 1 1
- JIS flange 4
- Lower mount__¼ NPT female 1
- NS 40: G 1/8 B (male) NS 50, 63: G 1/4 B (male), 1
- Pipe adapter 1
- Rp 1/2__Rp 3/4 1
- Rp - female thread cylindrical (BSPT) 1
- Socket Weld 3
- Stainless steel 1
- Surface mounting 1
- Threaded 15
- UExSC 1
- UExUE 1
- Union End Sil Braze 9
- Union nut 1
- Via subplate with lateral female thread connection 2
Medium Temperature
Nominal Pressure
G½ - JIS flange
8 items
Digital Pressure Gauge Type P
4886
The SIKA Type P digital pressure gauge is suitable for both stationary and mobile measurement and display of pressure. The SIKA Type P digital pressure gauge can be used as a reference to explain the checking, adjustment and calibration of other pressure measurement devices directly on-site. Linearisation Multi-point adjustment can be performed if it is necessary to adjust the indicated values at different test points. Two-point adjustment is available for setting the zero point and slope of the measuring cell curve. Type P digital pressure gauges allow up to six offset values to be programmed to shift the characteristic curve to meet the most stringent customer expectations. PC connection and software Many digital pressure gauges have a serial interface port to allow measurement values and stored data to be transferred directly to a PC and documented. An inexpensive measurement data acquisition system can easily be assembled with suitable software and an interface converter. Processes can be readily monitored and analysed using the recorded and visualised measurements, and all data can be exported using standard programs such as Microsoft Excel. Remote control is also possible. Various software packages with extensive recording and display functions, logger and alarm evaluation as well as for calibration are available. Analogue output An electrical output signal enables remote display on a control console or in a control room as well as the connection of external recorders and indicating instruments. Relay output Digital pressure gauges allow limit contacts to be closed even at low pressures. There is no need for high actuation forces for magnetic spring or inductive contacts, which makes it easier to signal critical equipment conditions and perform supplementary control tasks.
- USD
Digital Pressure Gauge Type J
4892
The SIKA Type J digital pressure gauge is suitable for both stationary and mobile measurement and display of pressure. The SIKA Type J digital pressure gauge can be used as a reference to explain the checking, adjustment and calibration of other pressure measurement devices directly on-site. PC connection and software Many digital pressure gauges have a serial interface port to allow measurement values and stored data to be transferred directly to a PC and documented. An inexpensive measurement data acquisition system can easily be assembled with suitable software and an interface converter. Processes can be readily monitored and analysed using the recorded and visualised measurements, and all data can be exported using standard programs such as Microsoft Excel. Remote control is also possible. Various software packages with extensive recording and display functions, logger and alarm evaluation as well as for calibration are available. Analogue output An electrical output signal enables remote display on a control console or in a control room as well as the connection of external recorders and indicating instruments. Relay output Digital pressure gauges allow limit contacts to be closed even at low pressures. There is no need for high actuation forces for magnetic spring or inductive contacts, which makes it easier to signal critical equipment conditions and perform supplementary control tasks.
- USD
VMZ 08 Magnetic Inductive Flow Sensor
7641
The SIKA VMZ 08 magnetic inductive flow sensor for electrically conductive liquids is designed for OEM applications. Thanks to the use of cost-optimized plastic components, the SIKA VMZ 08 has a compact and lightweight design. The smart flow sensors of the SIKA VMZ 08 induQ® series operate according to the principle of induction: The measuring pipe is in a magnetic field (B). If an electrically conductive medium, with the flow (Q) to be measured, flows through the measuring pipe and thereby at a right-angle to the magnetic field, a voltage (U) is induced in the medium. This voltage is proportional to the average flow velocity and is picked up by two electrodes. Regarding flow proportional output signals, two versions are available: Frequency output signal (standard) Analog and frequency output signal (option) The pulse rate can be configured at the factory. The induQ® sensors enable the flow measurement/volume flow measurement or dosing of electrically conductive liquids without any moving parts. They are the ideal flow sensors when accuracy and reliability are a must.
- USD
VMZ 06 Magnetic Inductive Flow Sensor
7643
The SIKA VMZ 06 magnetic inductive flow sensor for electrically conductive liquids is designed for OEM applications. Thanks to the use of cost-optimized plastic components, the SIKA VMZ 06 has a compact and lightweight design. The smart flow sensors of the SIKA VMZ 06 induQ® series operate according to the principle of induction: The measuring pipe is in a magnetic field (B). If an electrically conductive medium, with the flow (Q) to be measured, flows through the measuring pipe and thereby at a right-angle to the magnetic field, a voltage (U) is induced in the medium. This voltage is proportional to the average flow velocity and is picked up by two electrodes. Regarding flow proportional output signals, two versions are available: Frequency output signal (standard) Analog and frequency output signal (option) The pulse rate can be configured at the factory. The induQ® sensors enable the flow measurement/volume flow measurement or dosing of electrically conductive liquids without any moving parts. They are the ideal flow sensors when accuracy and reliability are a must.
- USD
H2F 2-way Control Valve
9021
The Clorius H2F 2-way control valve is designed for regulating hot water, steam and hot oil systems. The double-seated H2F control valve is used in installations where the system pressure necessitates a closing force greater than available in the actuator programme for a single-seated valve. The valves are used in conjunction with our temperature or pressure differential regulators for controlling industrial processes, district or central heating plants or marine installations. Design The valve components – spindle, seats and cone – are made of stainless steel. The valve body is made of cast steel GP240GH (GS-C25) with flanges drilled according to EN 1092-1. The connection thread for the actuator is G1B ISO 228. The valves are double-seated. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174). Function Without the actuator being connected, the valve is held in an open position by means of a spring. With pressure on the spindle, the valve will close. In connection with thermostats, pneumatic or electric actuators, the valves will close at rising temperatures. For cooling circuits, the valve can be used in conjunction with a reverse acting electric actuator. Alternatively, a reverse acting valve can be used with our self-acting thermostats. The quadratic characteristic will not cease until the flow has dropped below 4% of the full flow.
- USD
G3F 3-way Control Valve
9075
The Clorius G3F 3-way control valve is designed for hot water and hot oil systems and can be installed in pipe systems as mixing or diverting valves. The G3F control valve is used in conjunction with our temperature regulators for controlling industrial processes, district or central heating plants or marine installations. The 3-way control valve components – spindle, seats and cone – are made of stainless steel. The valve body is made of nodular cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The thread for the actuator connection is G1B ISO 228. The valves have two balanced single seats and are designed for tight closure. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174). Without an actuator being installed, connection A-AB is fully open and connection B-AB completely closed, by means of a spring. By increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle, and when the spindle is pressed to the bottom, connection B-AB is fully open and connection A-AB completely closed. The valve characteristics are as follows: Port A-AB and AB-A: quadratic Port B-AB and AB-B: almost linear These characteristics ensure constant total flow under almost all pressure conditions and optimum circulation in the individual circuits.
- USD
M3F 3-way Control Valve
9091
The Clorius M3F 3-way control valves are designed for lubricants, hot water and other liquids and can be installed in pipe systems as mixing or diverting valves. The M3F control valve is used in conjunction with temperature regulators for controlling industrial processes, district or central heating plants or marine installations. The valve components – seats, cone and stem are made of stainless steel. The valve body is made of cast iron EN-GJS-400 -15 with flanges drilled according to EN 1092-2 PN 16. The thread for the actuator connection is G1B ISO 228. The valves have two balanced single seats. The leakage rate is less than 0.5 % of the full flow (according to VDI/VDE 2174). Without an actuator being installed, connection A-AB is fully open and the connection B-AB completely closed by means of a spring. By increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle, and when the spindle is pres sed to the bottom, connection B-AB is fully open and connection A-AB completely closed. The valve characteristics are as follows: Port A-AB and AB-A: quadratic Port B-AB and AB-B: almost linear These characteristics ensure constant total flow under almost all pressure conditions and optimum circulation in the individual circuits.
- USD
G3FM-TR 3-way Control Valve
9113
The Clorius G3FM-TR 3-way control valve with a slide for a quarter-turn operation designed for regulating freshwater, lubricating oil and other liquid media. The G3FM-TR valve is designed for use in conjunction with industrial processes, district heating and marine installations with large water or lubricating oil volumes: Engine Jacket Cooling Water System Lubricating Oil Cooling Central Cooling Water System, etc. The valves are designed for use in conjunction with valve motor type CAR to handle manual operation or use in conjunction with a pneumatic actuator. The valve body and the valve slide are made of nodular cast iron. The valve flanges are drilled according to EN 1092-2 (JIS B 2210 option). The slide is firmly connected with the motor spindle. When the slide is in the one outer position by turning the spindle, connection A-AB is fully open and connection B-AB is fully closed. In the other outer position, connection A-AB is fully closed, and connection B-AB is fully open. In the intermediate positions, the opening degrees change proportionally. The valve has a small tolerance between the body and slide. To minimize the leakage, an O-ring is mounted in a groove on the slide.
- USD
1 - 8 of 8
1