Flange, DN 150...DN 300__DN 350...DN 600__DN 65...DN 120 - PN 10

The CLorius G2FM-T control valve is a two-way control valve with a blocked port making a two-way control valve. The slide for a quarter-turn operation designed for regulating freshwater, lubricating oil and other liquid media. The G2FM-T valve is designed for use in conjunction with industrial processes, district heating and marine installations with large water or lubricating oil quantities. The valves are designed for use in conjunction with valve motor type CAR with handle for manual operation or for use in conjunction with a pneumatic actuator. Design The valve body and the valve slide are made of nodular cast iron. The valve flanges are drilled according to EN 1092-2 or ANSI Class 150. Function The slide is firmly connected with the motor spindle. When the slide is in the one extreme position by turning the spindle, connection A-AB is kept fully open. In the other extreme position connection, the valve is fully closed. In the intermediate positions, the opening degrees change proportionally. The valve has a small tolerance between body and slide. To minimize the leakage an O-ring is mounted in a groove on the slide.

The Clorius M3F 3-way Control Valve (DN80-DN150) is designed for regulating water, lubricating oil and other liquid media and can be mounted in the pipe system as either mixing or diverting valves. However, when mounting as a diverting valve, the pressure drop is increased, compared with mounting as a mixing valve*. The valves are used in conjunction with Clorius temperature regulators for controlling industrial processes, district and central heating plants and marine installations. Design The valve components – seats and cone are made of alu bronze, the spindle is made of stainless steel. The valve body is made of cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The connection thread for the actuator is G1B ISO 228. The valves have two balanced single seats. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174). Tight between port 1(AB) og 3(B) is optional. Function Without an actuator being installed, connection A-AB is fully open, and connection B-AB completely closed using a spring. By increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle. When the spindle is pressed to the bottom, connection B-AB is fully open, and connection A-AB completely closed. * If the valves are applied as diverting valves, the pressure drop will increase by 35%, and the kvs-value will decrease by 14% as against mixing valves.

The Clorius L3F 3-way control valve is designed for regulating hot water – and cold and hot seawater. The L3F control valve is used in connection with temperature regulators in control systems for industrial processes or marine installations. The valve components – valve body, seats, cone and spindle – are made of seawater-resistant materials with connection flanges drilled according to DIN 86021. The connection thread for the actuator is G1B. Without an actuator being installed, connection 2-1 is fully open, and connection 3-1 completely closed using a spring. By increasing pressure on the spindle, the opening of the ports changes proportionally to the travel of the spindle, and when the spindle is pressed to the bottom, connection 3-1 is fully open and connection 2-1 completely closed. *In case the valves are applied as diverting valves, the pressure drop will increase by 35% and the Kvs-value will decrease by 14% as against mixing valves.