close
Filter By
Company
Accuracy
Ambient Temperature
- 0...50°C 3
- 0...55°C 1
- 0...60°C 1
- 0...70°C 3
- 0...85°C 1
- 0...100°C 2
- 0...125°C 1
- 0...200°C 1
- 10...40°C 1
- -10...60°C 1
- -10...70°C 5
- -20°60°C 15
- -20...50°C 2
- -20...60°C 25
- -20...70°C 4
- -20...80°C 5
- -25...70°C 4
- -25...80°C 3
- -25...85°C 4
- -25...100°C 1
- -30...70°C 1
- -30...80°C 1
- -40...60°C 13
- -40...65°C 3
- -40...70°C 4
- -40...80°C 4
- -40...85°C 3
- -40...100°C 5
- -40...125°C 1
- -50...65°C 1
- -50...70°C 2
- -70...60°C 1
Connection Type
- 2 x G ¼ B female__2 x G ½ B male__½ NPT male 1
- 2 x G½ female, lower mount (LM) 1
- Clamp connection per DIN 32676 / ISO 2852 / BS4825 1
- Copper alloy, lower mount (LM) G 1/4 B (male), 14 1
- G ¼__SW 14 1
- G¼__SW 14 1
- G ¼ B (male)__Stainless steel 316L 1
- G ¼ B__G …› B__¼ NPT__…› NPT 1
- G ¼ B female__G ½ B male__½ NPT male 1
- G ½__G¼__SW 14__SW 17__SW 22 1
- G ½__Lower mount__SW22 1
- G ½ B 1
- G ½ B__½ NPT__½ NPT female 1
- G ½ B female__G ½ B male__½ NPT male 1
- NS 40: G 1/8 B (male) NS 50, 63: G 1/4 B (male), 1
Filling
Material Spec
Medium Temperature
-20...60°C
25 items
DPGT43.100 / 43.160 Pressure Gauge
1507
At any point where a differential pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA DPGT43.100 / 43.160 intelliGAUGE can be used. Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost. An additional measuring point for mechanical pressure indication can thus be saved. The WIKA DPGT43.100/43.160 is based upon a model 732.51 high quality, stainless steel pressure gauge with a nominal size of 100 or 160. The pressure gauge is manufactured by EN 837-3. These differential pressure gauges are made of highly corrosion-resistant stainless steel and feature an all-metal media chamber sealing. Therefore no elastomer sealing elements are required so that a better long-term leak tightness is ensured. A high overpressure safety is achieved by the all-metal construction and the close-fitting design of the measuring element. The rugged design of the diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced. The electronic WIKA transmitter, integrated into the high-quality mechanical differential pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display. The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually.
- USD
PG43SA-S Pressure Gauge
2753
The WIKA PG43SA pressure gauge is designed for the requirements of sanitary applications. The purely mechanical pressure transmission, using the diaphragm-element measuring principle, and the high overpressure safety ensure a safe pressure measurement. As a result of the dry measuring cell, the risk of contamination of the product by transmission fluid is eliminated. The flush welded diaphragm element in conjunction with the aseptic process connections (e.g. clamp, threaded, VARIVENT®, BioControl®) enables a dead-space free connection to the process. The pressure gauge finds applications, for example, in systems for ultrapure steam generation or as an independent pressure display, without the need for an external power supply, on portable tanks. The PG43SA-S in hygienic design can be used for CIP (cleaning in place) and SIP (sterilisation in place) and in wash-down areas. The measuring instrument can thus be cleaned reliably and time-efficiently. At an easily accessible point on the top of the case, the zero point can be easily corrected. Based on a third-party verification, WIKA's model PG43SA-S corresponds to the 3-A Sanitary Standard. A variety of 3.1 and 2.2 certificates are available for GMP-compliant documentation, such as a material certificate or the list of single measured values.
- USD
PG43SA-D Diaphragm Pressure Gauge
2811
The WIKA PG43SA-D pressure gauge has been designed specifically for the highest safety requirements in the pharmaceutical and biotechnology industries. Through its patented diaphragm monitoring, the risk of an undetected rupture of the diaphragm is eliminated since a red warning dot is immediately displayed on the dial. If this point on the dial remains white, then the pressure element is intact, and cost-intensive maintenance on the measuring point is not required. In the event of a diaphragm rupture, a second barrier in the pressure measuring instrument ensures the reliable separation of ambience and process. The diaphragm pressure gauge transmits the pressure, purely mechanically and without transmission fluid, from the process to the pressure element. Due to their thickness, the diaphragm elements are very robust and have high overpressure safety, ensuring a safe pressure measurement without any risk of contamination. The flush welded diaphragm element in conjunction with the aseptic process connections enables a dead-space free connection to the process. The independent pressure display, needing no external power, finds applications with the processing and transport of high-quality and critical media, for example on portable tanks.WIKA's PG43SA-D in hygienic design can be used for CIP (cleaning in place) and SIP (sterilisation in place) and in wash-down areas, or it can be completely sterilised in an autoclave. The measuring instrument can thus be cleaned reliably and time-efficiently. The model PG43SA-D conforms to the 3-A Sanitary Standard and is certified by EHEDG.
- USD
312.20 Mechanical Test Gauge
2858
The WIKA 312.20 mechanical test gauge has been specifically designed for the measurement of pressures with high accuracy. With its accuracy class of 0.6, the Bourdon tube pressure gauge is suitable for testing industrial type pressure gauges or for precision measurement in laboratories. For the respective measuring requirement, a scale range between 0 … 0.6 and 0 … 600 bar can be selected. The WIKA 312.20 mechanical test gauge is constructed with a case from stainless steel and wetted parts from copper alloy. The instrument meets the requirements of the international industry standard EN 837-1 for Bourdon tube pressure gauges. The optimal readability of the instrument, with a nominal size of 160 mm, is achieved via a knife-edge pointer and a dial with fine divisions. Supported through the optional mirror band scale, the parallax error can be eliminated.
- USD
612.20 Capsule Pressure Gauge
2861
The WIKA 612.20 capsule pressure gauge is based upon the proven capsule measuring system. The capsule measuring principle is particularly suitable for low pressures. On pressurisation, the expansion of the capsule element, proportional to the incident pressure, is transmitted to the movement and indicated. The case and the bayonet ring are made from stainless steel. The material of the process connection is a copper alloy. The modular design enables a multitude of combinations of case materials, process connections, nominal sizes and scale ranges. Due to this high variance, the instrument is suitable for use in a wide range of applications within the industry. For mounting in control panels, the capsule pressure gauges can, depending on the process connection, be fitted with a surface mounting flange or with a triangular bezel and mounting bracket.
- USD
113.53 Bourdon Tube Pressure Gauge
3316
The WIKA 113.53 bourdon tube pressure gauge is a liquid-filled gauge with a max. 0…600 bar scale range, 1.5″ dial size, 1/8″ NPT lower mount connection, brass wetted material and stainless steel case material. The WIKA 113.53 gauge is the perfect choice for OEM and general industrial applications requiring an economical, liquid-filled pressure gauge. Typical applications include air compression, hydraulic presses, pumps, marine engines, as well as other types of industrial hydraulic and pneumatic equipment.
- USD
PGS21 Bourdon Tube Pressure Gauge
3349
The WIKA PGS21 switchGAUGE is a combination of a bourdon tube pressure gauge and a pressure switch. It offers the usual analogue display, which can be read on-site irrespective of the power supply, and in addition the possibility to switch a potential-free electrical signal. One or two fixed switch points are factory-set to customer requirements, between 10 and 90 % of the scale range, and indicated on the dial by red mark pointers. Depending on the pressure gauge's pointer position, the circuit will be opened or closed. Thus the switchGAUGE can be used actively for process monitoring, for example, to control the level of a gas cylinder or a hydraulic circuit. The switchGAUGE is available as standard in scale ranges from 0 … 2.5 to 0 … 400 bar with an accuracy class of 2.5 and a 1 m round cable for the electrical connection. Through various options (e.g. other scale ranges, higher accuracy class, different cable lengths, plug connection) the pressure measuring instrument can be matched precisely to the customer-specific requirements of each application. The instrument has been designed in accordance with EN 837-1 and fulfils all the requirements within it. Furthermore, it features increased ingress protection of IP 65 and can, therefore, be offered with optional liquid filling to increase its vibration resistance.
- USD
PGS25 Bourdon Tube Pressure Gauge
3352
The robust WIKA PGS25 switchGAUGE is a combination of a Bourdon tube pressure gauge and a pressure switch. It offers the usual analogue display, which enables reading the process pressure on site, and also the possibility to switch up to two electrical signals. The switch contacts are factory-set in a range between 5 % and 95 % of the scale range. The measuring system with a bourdon tube per EN 837-1 produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. That provides a pressure-proportional signal for further processing. Depending on the switch point setting, the circuit is opened or closed when the alarm value is reached. Thus the switchGAUGE can be used actively for process monitoring, for example, to control the level of a gas cylinder or a hydraulic circuit. The switchGAUGE is available as standard in scale ranges from 0 … 1.6 bar to 0 … 400 bar with an accuracy class of 2.5 and a 1 m round cable for the electrical connection. The stainless steel case fulfils the requirements of IP65 ingress protection. The resistance to shock and vibration can be increased by the silicone oil case filling. Thus the instrument is perfectly suited for use in harsh industrial environments. Through various options (e.g. higher accuracy class, another cable length) the pressure measuring instrument can be matched exactly to the customer-specific requirements of each application.
- USD
DPGT43HP.100 / 43HP.160 Pressure Gauge
3358
At any point where a differential pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA DPGT43HP.100 / 43HP.160 intelliGAUGE (patent applied for, among others European Patent No. EP 06113003) can be used. The electronic WIKA transmitter, integrated into the model 732.14 high-quality mechanical differential pressure gauge, combines the advantages of electrical signal transmission with the benefits of a local mechanical display. The model DPGT43 is based upon a model 732.14 high-quality, stainless steel pressure gauge with a nominal size of 100 or 160. The pressure measuring instrument is manufactured in accordance with EN 837-3. The use of high-quality stainless steel materials and the robust design are geared to applications in the chemical and process engineering industries. Thus the instrument is suitable for liquid and gaseous media, also in aggressive environments. A high overload safety is achieved by the all-metal construction and the close-fitting design of the pressure element. The robust diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft “ it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal, proportional to the pressure, of 4 … 20 mA, is produced. In addition, the electrical zero point can be set manually. The electronic WIKA sensor, integrated into the high-quality mechanical differential pressure gauge, combines the advantages of electrical signal transmission with a local mechanical display that remains readable during a power failure. An additional measuring point with a mechanical pressure display can thus be saved.
- USD