close
Filter By
Company
Gauge Valves
9 items
Type G 1/4 Gauge Valve
8644
The size of the AS-Schneider Gauge Valves G 1/4 is smaller compared to the standard gauge valves, especially the brass type. Carbon steel and stainless steel components are identical to the standard gauge valves. The components of the brass type are smaller and the valve stem is a one-piece design. The valves are applicable for a max. allowable (Working) Pressure (PS) of 125 bar (1,813 psi) (brass) respectively 250 bar (3,626 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 200°C (392°F) (brass type) / 232°C (450°F) (carbon steel and stainless steel) for liquids, gas or vapours. Please consider the requirement that valves and above all measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length.
- USD
DIN 16272 Gauge Valves
8647
AS-Schneider Block and Bleed DIN 16272 Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16272. Gauge Valves with test flange (see below) are not mentioned in DIN 16272. According to DIN 16272 are the valves applicable for a max. allowable (Working) Pressure (PS) of 250 bar (3,626 psi) (brass) respectively 400 bar (5,801 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapours. The max. allowable Temperature (TS) of 120°C (248°F) is considering the requirement that valves and measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length. However the AS-Schneider valves can be used for temperatures up to 300°C (572°F) – PTFE up to 232°C (450°F), Graphite up to 300°C (572°F).
- USD
Type M Multiport Gauge Valve
8651
AS-Schneider Type M Multiport Gauge Valve is designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard types are provided with 3 female outlet ports and are therefore suitable for vertical or horizontal installations.
- USD
Soft Seated Multiport Gauge Valves
8656
AS-Schneider Soft Seated Multiport Gauge Valves M Type is designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard types are provided with 3 female outlet ports and are therefore suitable for vertical or horizontal installations. Bore Size: 1/4″ (6.35 mm) The valves are fully roddable due to the Cone Design Valve Seat.
- USD
Type GA Gauge Valve
8660
AS-Schneider E Series Gauge Valves GA Type is designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The GA type is provided with a vent/test port, as standard 1/4 NPT Female. A pipe plug is installed in this port by default.
- USD
DIN 16271 Gauge Valve
8664
AS-Schneider DIN 16271 Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16271. Gauge Valves with test flange (see below) are not mentioned in DIN 16271. According to DIN 16271 are the valves applicable for a max. allowable (Working) Pressure (PS) of 250 bar (3,626 psi)(brass) respectively 400 bar (5,801 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapours. The max. allowable Temperature (TS) of 120°C (248°F) is considering the requirement that valves and measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length. However the AS-Schneider valves can be used for temperatures up to 300°C (572°F) – PTFE up to 232°C (450°F), Graphite up to 300°C (572°F).
- USD
Type G Soft Seated Gauge Valve
8668
AS-Schneider Type G Soft Seated Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard type GS is equipped with a bleed screw. The GA Type is provided with a vent/test port, as standard 1/4 NPT Female. A pipe plug is installed in this port by default. Bore Size: 1/4″ (6.35 mm) The valves are fully roddable due to the Cone Design Valve Seat.
- USD
Type GS Gauge Valves
8672
AS-Schneider Type GS Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard types are equipped with a bleed screw.
- USD
DIN 16270 Gauge Valve
8676
AS-Schneider Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16270. The type with 1/2 NPT connection (see below) is not mentioned in DIN 16270. According to DIN 16270 are the valves applicable for a max. allowable (Working) Pressure (PS) of 250 bar (3,626 psi) (brass) respectively 400 bar (5,801 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapours. The max. allowable Temperature (TS) of 120°C (248°F) is considering the requirement that valves and measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length. However the AS-Schneider valves can be used for temperatures up to 300°C (572°F) – PTFE up to 232°C (450°F), Graphite up to 300°C (572°F).
- USD
1 - 9 of 9
1