close
Filter By
Company
Control Valves
10 items
Rotary Eccentric Control Valve
RECV
The original eccentric plug rotary valve combines quality performance and featrues with an economical design. Features Design Simplicity Long-Term Reliability Suitable for slurry or flashing applications Automatic Throttling Fast Facts about the Masoneilan Camflex First introduced in 1968 the Masoneilan Camflex Rotary Globe control valve has over 1.2 Million units installed worldwide Setpoint Integrated Solutions has over 40,000 Camflex Rotary Globe control valves installed across the Gulf Coast coverage area Per API 553 recommended practices for Refinery valves, Camflex Rotary Globe valve is recommended in refinery distillation, FCCU, catalytic reformer, delayed coker, gas plant,, and sulfur recovery unit. Camflex Rotary Globe has performed for decades in difficult applications including brine water, dry chlorine, HCL, Heater Drain, Saturated Steam, Ammonia, Vinyl Chloride, Vinyl Acetate, Titanium Tetrachloride, Sulfuric Acid, Sulfur, Steam Condensate, Rich Amine, Bottom Residuals, Phosphorus Trichloride, Phosphorous acid, Alumina silica acid, Nitric Acid, Dowtherm, Green and Black Liquor. Camflex Rotary Globe combined with the SVI II AP SMART positioner exhibits high-resolution throttling control performance achieving .002 inch step change (2 thousands of an inch), 0% overshoot, 1.5 sec. settling time, step change time .01 sec., wait time 10 sec. Higher fluid recovery factor offering more resistance to cavitation than a segmented ball control valve Multiple inherent flow characteristics are available including linear, =% 30, =% 50 and customized characterized characterization when combined with SVI II AP SMARt positioner Slurry service design available with o-ring sealed bearings, hardened flow gallery, protected outlet, and ceramic trim options Camflex Rotary Globe offers two face to face take out lengths, ISA S75.04 Segmented Ball Valve, and ISA S75.03 Globe Valve
- USD
LV690 Rotary Control Valve
LV690
This high-quality control valve is ready at your convenience. The LV690 is available with either a single or dual ball seal. This rotary control valve utilizes a heavy-duty construction which is suitable for both modulating service and on-off application. PRODUCT BENEFITS Flangeless valve body typically installed in gas transmission or liquid pipelines. Designed to be used with ANSI CL600 or CL900 connections. Single seal offering provides tight shutoff in the forward flow direction. Dual seal combines tight shutoff with bidirectional flow capability. We can provide you with actuation and instrumentation to accommodate any specific customer specification.
- USD
High Pressure Letdown Valve
HPLV
The high pressure liquid letdown valve is used in high pressure liquid service applications to help eliminate cavitation. Features High-pressure liquid letdown Anti-cavitation Wide flow paths Zero loss of capactiy Multi-step flow path Long term reliability Longer service life Industry leading technology High-Pressure, Anti-Cavitation Control Valves Integrated smart engineered solutions for severe service applications The multi-step flow path created by the LincolnLog trim design, reduces the pressure drop in multiple stages without allowing the pressure to drop below the fluid vapor pressure thus preventing cavitation. These active stages throttle in unison to avoid taking the full pressure drop across any individual stage. Wide flow paths in the Lincoln Log allow free passage of large particles through the unique trim body design without causing any damage or loss of capacity. LincolnLog Reliability Long-term Reliability The Masoneilan LincolnLog valve from Baker Hughes offers long-term reliability in high-pressure, liquid-letdown, anti-cavitation control valve applications. Engineering knowledge and expertise has made us a leader in control valve applications with products such as Flexible Better Fit severe-service solutions. The LincolnLog valve is a control valve solution of choice throughout the wide spectrum of severe-service liquidflow applications. Proven Performance The Masoneilan LincolnLog valve design has more than 20 years of proven field performance as the industry’s premier high-pressure, liquid-letdown solution. The Masoneilan LincolnLog is a reliable and robust anti-cavitation control valve package with enhanced multi-stage and axial flow-trim technology incorporated into a rugged valve design. Over the years, the LincolnLog valve has successfully met the challenges of thousands of severe-service applications around the globe. Industries and Applications UPSTREAM OIL and GAS Pump Recirculation Produced Water Injection High-Pressure Separator REFINING Rich Amine Service Cold High-Pressure Separator Letdown POWER GENERATION Pump Recirculation Boiler Feedwater StartUp High-Pressure Spraywater Control Meeting Exacting Industry Specifications The LincolnLog* valve is available in a variety of body configurations, sizes, materials, ratings and trim types. The wide variety of trim designs in the LincolnLog valve includes options that offer up to a 150:1 turndown ratio, enabling response to a wide range of process conditions. With a number of combinations of forged or cast valve bodies, standard or exotic alloys, API or ANSI-rated construction, and globe or angle configurations, the LincolnLog valve meets or exceeds exacting industry specifications such as corrosive service (NACE) and Pressure Equipment Directive (PED) compliance.
- USD
Reciprocating Cage Guided Valve
RCGV
Heavy duty valve design with balanced trim configurations. The cage guiding offers added stability and the versatility to offer noise attenuation and anti-cavitation solutions. Features Balanced, Heavy Duty, Cage-guided Globe-Style Control Valve Maximum performance in severe service conditions Single and Double stage Lo-dB / Anti-Cavitation Trim Repairable in line Dependable globe-style control valve solutions for maximum performance in severe service conditionsThe Masoneilan 41005 series valves’ rugged design delivers excellent performance even in severe conditions. Standard hardened trim materials in the 41005 Series provide excellent wear resistance and a long life even under high-pressure and high-temperature conditions. Various trim options are available to control and reduce the potentially damaging effects of noise and cavitation. Dependable control-valve tight shutoff helps minimize the loss of valuable process fluids and potentially can eliminate the need for separate isolation valves. In addition, excessive valve seat leakage can lead to premature trim wear and reduced performance. Sizes: 2” through 24” (50 through 600 mm) Ratings and Connections: flanged: ANSI 150 – 2500, UNI-DIN 10 – 400; welded: BW or SW; screwed: NPT 2” (50 mm) Body Material: carbon steel; stainless steel; chrome-moly Actuators: model 87/88 multi-spring diaphragm; model 37/38 spring diaphragm; cylinder Trim: balanced cage-guided trim; Lo-dB, anti-cavitation and VRT (Variable Resistance Trim), single and multiple cages are available Inherent Characteristics: linear or equal percentage Description: The 41005 Series is a heavy-duty valve design with balanced trim configurations. It offers cage guiding for added stability. We also provide full service on this and any other brand and model of Control Valve.
- USD
Rotary Eccentric Lined Valve
RELV
A PFA lined control valve with an eccentric rotary plug that offers tight shut off, low dynamic forces and control. This valve is suitable for hydrofluoric and sulfuric acid applications. Features Types: cast, one piece, top entry Sizes range from 1? to 3? 150Lb Material: all ductile iron Lining: PFA, translucent, melt processed. For corrosive applications The Masoneilan 31000 Series is a PFA-lined control valve with an eccentric rotary globe plug that features tight shut-off capability, low dynamic forces, and control. This valve offers a solution for aggressive acids that tend to cause bellows permeation problems in reciprocating designs. Although a rotary product, the 31000 series has a reciprocating face to face. Description: Complete PFA or solid PTFE encapsulation of all metal components shields against chemical corrosion for long service life in harsh chemical environments. Size: 1? through 3? (25 through 80 mm) Ratings and Connections: Flanged ANSI 150, UNI-DIN 10 – 16 Body Materials: Cast iron PFA lined Actuator: Model 35 spring-opposed rolling diaphragm Trim: Eccentric rotary plug Inherent Characteristics: Linear We also provide full service on this and any other brand and model of Control Valve.
- USD
Reciprocating Micro-Flow Control Valve
RMFCV
A compact globe style valve specifically for microflow control. Available with bellows seal and anti-cavitation trim options. The VariPak valve outshines conventional microflow valves with its support of a wide range of nominal Cv values (from 0.0016 to 3.8), using only eight plugs and five seats. Features: Available high-pressure liquid letdown For low flow applications Throttling control performance Wide range of options Anti-cavitation trim solution The Varipak valve is available with an effective high-pressure, liquid let-down, anti-cavitation trim solution – the Varilog* trim. This unique design includes a multi-stage axial flow plug and liner, which provides dirt-tolerant operation and high wear resistance.
- USD
Reciprocating Semi-Balanced Control Valve
RSBCV
A double ported valve with top and bottom stem guiding. This design is suitable for high-pressure drop applications where dirty fluid conditions exist. Features: High Pressure Drop Capability Dirty Service Design Excellent throttling control characteristics NACE Compliant Repairable in line The 10000 Series double seated control valves are semi-balanced designs, providing high allowable pressure drops, reduced actuator thrust requirements, and large flow areas to effectively handle dirty fluid applications. Hardened trim available for severe service applications as a standard.
- USD
Top-Guided Globe Valve
TGGV
A heavy top-guided unbalanced design with noise attenuation and anti-cavitation trim options. Features: Rugged, heavy top plug guiding globe valve Optimum control performance Repairable in line Single and Double Stage Lo-dB / Anti-Cavitation Trim For a wide range of automated process control applications with different specifications Direct Replacement for the Masoneilan 2600 model Product Specification: The 21000 Series single ported unbalanced trim, heavy top guided control valves are designed with built-in versatility making them well suited to handle a wide variety of process applications. 21000 Series valves are available in various materials including those that meet NACE Compliance. Balanced trim design Smaller actuators reduce overall assembly size and weight, Heavy cage-guided construction, Heavy guiding of the plug enhances throttling control performance, Few soft goods…reliability and low maintenance, Standard solutions to control noise, cavitation and valve leakage, Versatile valve technology, Robust construction, Long-term smooth operation, Process control, and High process yields. Sizes: 3/4” through 8” (20 through 200 mm) Ratings and Connections: flanged: ANSI 150 – 2500, UNI-DIN 10 – 400; welded: BW or SW; screwed: NPT 3/4” through 2” (20 through 50 mm) Body Material: carbon steel; stainless steel; chrome-moly Actuators: model 87/88 multi-spring diaphragm; cylinder Trim: single-seat plug top guided; Lo-dB and anti-cavitation trims, single or double stage are available Inherent Characteristics: linear or equal percentage
- USD
V-Log Trim Valve
VLTV
V-Log Trim Valves can feature enlarged bodies to accommodate up to 36-stages of pressure reduction. They also can offer precise capacity control while efficiently reducing noise and outlet velocities using single or multiple cages. Features Available in both globe and angle-style designs Lo-dB and V-LOG trims Severe Service Flexible solution to fit high-pressure drop applications The Masoneilan 49000 Series V-LOG™ Low-Noise Anti-Cavitation Valve series can be applied through a wide range of applications from high-pressure drop, anti-cavitation liquid designs through low-noise gas and steam service. Offers a flexible solution to fit high-pressure drop applications in any pipe size or process fluid application. The Masoneilan 49000 Series features enlarged body galleries to accommodate up to 36-stages of pressure reduction. Specific Applications include boiler feedwater start-up and control, steam letdown, pump discharge, water reinjection, gas recycle, and vent applications. Sizes: 4” through 36” (100 through 900 mm) Ratings and Connections: flanged: ANSI 150-2500, UNI-DIN 10 – 400; welded: BW Body Material: carbon steel; stainless steel; chrome-moly Actuators: model 37/38 spring-opposed diaphragm; model 87/88 multi-spring-opposed diaphragm; cylinder Trim: single or double stage Lo-dB and V-LOG energy management trim; low noise flow-to-open designs or anti-cavitation flow-to-close Inherent Characteristics: linear or equal percentage Description: The 49000 Series features enlarged body galleries to accommodate up to 36-stages of pressure reduction. We also provide full service on this and any other brand and model of Control Valve.
- USD