close
Filter By
Company
Accuracy
Medium Temperature
Temperature Range
Transmitters
12 items
IL-10 Submersible Pressure Transmitter
1500
The WIKA IL-10 submersible pressure sensor is intrinsically safe and designed for the highest requirements of level measurement. Owing to its high accuracy, reliability and their excellent media resistance, it is the ideal solution for almost all level measurements in hazardous areas. Especially noteworthy are the outstanding approval-related characteristics (IECEx and ATEX). In addition, the IL-10 has the North-American approval CSA (Canada). A hermetically sealed and robust stainless steel case with ingress protection IP68 enables immersion depths of up to 300 m. The submersible pressure transmitter is supplied with a power supply of DC 10 … 30 V via a suitable isolated barrier and provides an output signal of 4 … 20 mA, 2-wire. Especially noteworthy are the outstanding approval-related characteristics (IECEx and ATEX). Design A hermetically sealed and robust stainless steel case with ingress protection IP68 enables immersion depths of up to 300 m. The submersible pressure transmitter is supplied with a power supply of DC 10 … 30 V via a suitably isolated barrier and provides an output signal of 4 … 20 mA, 2-wire.
- USD
FLM-CA Magnetostrictive Level Transmitter
1658
The WIKA FLM-CA magnetostrictive level transmitter is used for the high-accuracy, continuous level detection of liquids and is based on determining the position of a magnetic float according to the magnetostrictive measurement principle. The FLM-CA emits a 4 ¦ 20 mA output signal, which is configured via buttons within the probe head. Optionally, the WIKA FLM-CA is also available with HART ® protocol as a digital output signal. Probe lengths of 100 mm to 3 m and also various temperature and pressure ranges are possible. In comparison to the FLM-S, the FLM-CA is particularly notable for its very compact and space-saving design. In addition, it can be used in applications with vibrations up to 4 g.
- USD
FLR Reed Level Transmitter
1661
The WIKA FLR transmitter with reed measuring chain are used for level measurement in liquid media. The FLR transmitter serries works on the float principle with magnetic transmission. The float's magnetic system in the guide tube actuates a resistance measuring chain that corresponds to a 3-wire potentiometer circuit. The measurement voltage generated by this is proportional to the fill level. The measurement voltage is very finely-stepped due to the contact separation of the measuring chain and is thus virtually continuous. Depending on the requirements several different contact separations are available. Available models: FLR-S / Standard version FLR-P / Plastic version FLR-H / Setrrile version
- USD
FLM-H Magnetostrictive Sensor
2451
The WIKA FLM-H magnetostrictive sensor has been specifically designed for the requirements of the food and beverage, pharmaceutical and biotechnology industries. The sensor is particularly suitable for the special conditions of CIP/SIP cleaning processes, such as chemical stability towards cleaning liquids and high temperatures. The guide tube is directly welded to the process connection, which guarantees a crevice-free connection, additional sealings are not required. The sensor is supplied with a DC voltage of 10 … 30 V. Available output signals are 4 … 20 mA or 4 … 20 mA with HART® signal. The hygienically designed sensor housing, with an ingress protection of up to IP 68, offers secure protection for external cleaning with splash water and enables its use in high-humidity environments. The model FLM-H sensor fulfils the high demands of sanitary applications. It is marked with the 3-A symbol and current version number, as it confirms, based on a third-party verification, to the 3-A standard.
- USD
LF-1 Submersible Pressure Transmitter
2852
The WIKA LF-1 submersible pressure transmitter has been developed especially for the level measurement of fuels and oils. Extensive test cycles guarantee a permanent resistance and long service life in all oils and fuels as well as in aggressive crude oils and biofuels. Thanks to newly developed special cables, components made of high-alloyed stainless steel and optional overvoltage protection against lightning, the submersible pressure sensor for measurement applications in oils and fuels is also perfectly suited for use in the outdoor area. Precise level and temperature measurement with HART® communication A measurement uncertainty of max. 0.5 %, a long-term drift of 0.1 % and slight temperature errors make the WIKA LF-1 a reliable measurement solution for the monitoring of storage tanks. The additional analogue temperature output facilitates the compensation of a temperature-induced density error especially at temperatures of up to -40 … +80 °C. The integrated HART® communication can be used for scaling the measuring range and for the parameterisation of a unit, error signal, and others. Optimised electronics for battery operation The modern electronic system guarantees not only a high accuracy in the long term but also ensures a very long battery life thanks to the low power supply, low current consumption, fast response time and low-power output signals. Safety also in hazardous areas The optional intrinsically safe electronic system is authorised according to the common international standards and allows a safe worldwide application in explosive gases and vapours.
- USD
LH-20 Submersible Pressure Transmitter
3400
The WIKA LH-20 submersible pressure transmitter is designed for the most demanding of level measurement tasks. A slender design, highest accuracies, low temperature errors and an adjustable measuring range ensure the suitability of the LH-20 for all submerged level measurements. The WIKA LH-20 submersible pressure transmitter can adapt to countless applications and measuring media through a large number of features and options. Depending on the requirements, this level probe is available with, amongst other things, a titanium case, PUR/PE/FEP cable, 0.1 % accuracy, HART®, scaleability or parallel temperature output signal. For operation in hazardous environments, the LH-20 submersible pressure sensor is also available in an intrinsically safe version. For potable and fresh water applications, a potable water conformant product variant is possible in accordance with KTW and ACS. The WIKA LH-20 submersible pressure transmitter has been engineered for use in the harshest environments. Through a double, redundant sealing concept, it is permanently hermetically sealed. A robust design from stainless steel or titanium, with a spring-reinforced cable seal, ensures a long service life, even under the big mechanical loads of installation and continuous use. Designs with the highest media resistance using FEP cable and titanium cases, along with the integrated lightning protection, guarantee the longevity of the submersible pressure transmitter even under the most adverse environmental influences in aggressive media, in both indoor and outdoor use.
- USD
LS-10 Submersible Pressure Transmitter
3403
The model LS-10 submersible pressure transmitter has been optimised for simple measuring requirements in level measurement. It offers excellent quality, is cost-effective and reliable. It has been designed to the current demands of the industry and has a 4 … 20 mA output as standard, an accuracy of 0.5% and PUR cable. With IP 68 ingress protection, it is suitable for permanent level measurement up to 100 m water column. The submersible pressure transmitter features a hermetically-sealed and exceptionally robust stainless steel case. The proven, fully-welded construction ensures a long service life and permanent sealing.
- USD
SITRANS LC300 Level Transmitter
3731
The SIEMENS SITRANS LC300 is an inverse frequency shift capacitance continuous level transmitter for liquids and solids applications. It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate and cement industries. The SITRANS LC300 level transmitter is a 2-wire level measurement instrument combining a sophisticated yet easy-to-adjust microprocessor with field-proven probes. It's available in two versions: rod and cable. The SITRANS LC300 level transmitter has a stainless steel process connection with a PFA-lined probe. Materials with low or high dielectric properties are accurately measured, and Active-Shield technology ignores the effects of buildup near vessel nozzle.
- USD
LH-10 Submersible Pressure Transmitter
8083
The WIKA LH-10 submersible pressure transmitter is designed for level measurement in contact with the medium in harsh operating conditions. It offers an accuracy of 0.25 % and, with an ingress protection of IP 68, is suitable for permanent level measurements up to 300 m water column. It offers excellent quality, is reliable and, through a multitude of options, can be used in all conventional level measurement applications. For instance, integrated temperature measurement, lightning protection, case from Hastelloy® or FEP cable are available as options. For the highest accuracy requirements, the optional temperature measurement enables the compensation of temperature fluctuations in the medium on the measuring result. A hermetically-sealed, fully-welded and exceptionally robust stainless steel case ensures a long service life and permanent sealing. Specifically for external applications, integrated lightning protection is available, in order to ensure maximum operating life in harsh environments. For the highest media resistance, this submersible pressure transmitter is available in an optional design out of Hastelloy® and high-resistance FEP cable.
- USD