G2FR (Reverse Acting) 2-way Control Valve

Product Description

The Clorius G2FR (reverse acting) 2-way control valve is mainly intended to control cooling systems. The G2FR control valve is used in conjunction with temperature- or pressure differential regulators. As the reverse acting valve is held in a closed position using a built-in spring, the max. differential pressure, ΔpL, against which a valve can close depends on the spring, and when opening the valve, the actuator has to overcome the spring force. See datasheet to find the max. allowable values of ΔpL as well as the max. allowable inlet pressures for opening the valves, p1max for various actuator forces.

Design

The valve components, spindle, seats and cone, are made of stainless steel. The valve body is made of nodular cast iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The connection thread for the actuator is G1B ISO 228. The valves are double-seated and designed for tight closure. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174).

Function Reverse Acting

Without an actuator being connected, the valve is held in a closed position using a spring. With pressure on the spindle, the valve opens. In connection with our actuators, the valves act as œcooling valves, i.e. they open at rising temperatures. The linear characteristic will not cease until the flow has dropped below 4% of the full flow.