close
Filter By
Company
Level Transmitter
3 items
Maverick In-Tank Transmitter
LPR/LPT
The QTS Maverick In-Tank transmitter is configured with a flexible hose constructed of 316L stainless steel that can be ordered in lengths from 120 inches to 866 inches with a 4-20mA. Once installed and calibrated there is no requirement for scheduled maintenance or recalibration.
- USD
MTLT-5000
MTLT-5000
The MTLT-5000 is based upon the magnetostrictive principle. The sensing tube contains a wire which is pulsed at fixed time intervals. The interaction of the current pulse with the magnetic field created by the magnetic float causes a torsion stress wave to be induced in the wire. This torsion propagates along the wire at a known velocity, from the position of the magnetic float and toward both ends of the wire. A patented piezo-magnetic sensing element placed in the transmitter assembly converts the received mechanical torsion into an electrical return pulse. The microprocessor-based electronics measures the elapsed time between the start and return pulses and converts it into a 4-20 mA DC output which is proportional to the level being measured.
- USD
MTLT-6000 Magentostrictive
MTLT-6000
The MTLT-6000 is based upon the magnetostrictive principle. The sensing tube contains two wires which are pulsed with the magnetic field created by the magnetic float causes a torsion stress wave to be induced in the wire. The torsion propagates along the wire at a known velocity from the position of the magnetic float and toward both ends of the wire. The microprocessor-based electronics measure the elapsed time between the start and return pulses and convert it into 4-20mA DC output which is proportional to the level being measured.
- USD
1 - 3 of 3
1