close
Categories
Filter By
Company
Accuracy
Ambient Temperature
Connection Type
- 2 x G ¼ B female__2 x G ½ B male__½ NPT male 1
- 2 x G ¼ female__2 x ¼ NPT female 2
- 2 x G ¼ female__Centre distance 26 mm__In-line__Lower 1
- 2 x G½ female, lower mount (LM) 1
- 14 mm flats lower mount 1
- 5/8 - 18 UNF (female)__9/16 - 18 UNF (female)__G ½__M 1
- 5/8 - 18 UNF x 27 (female)__9/16 - 18 UNF (female)__ 1
- 19 mm flats__2 x G 3/8 B (male)__Back mount__Lower mo 1
- 22 mm flats__G ½ 1
- Back connection 1
- Back mount__G ½__Lower mount 1
- Clamp connection per DIN 32676 / ISO 2852 / BS4825 1
- Copper alloy, lower mount (LM) G 1/4 B (male), 14 1
- G 1„8__G ¼ 1
- G ¼__SW 14 1
- G¼__SW 14 1
- G¼ B (male)__G½ B (male)__SW14__SW22 1
- G ¼ B (male)__Stainless steel 316L 1
- G ¼ B (male)__SW 14 1
- G¼ B (NS63)__G½ B (NS80, 100) 1
- G ¼ B__G …› B__¼ NPT__…› NPT 1
- G ¼ B female__G ½ B male__½ NPT male 1
- G ½ 1
- G ½__G¼ 1
- G ½__G¼__M20 x 1.5__½ NPT 1
- G ½__G¼__SW 14__SW 17__SW 22 1
- G ½__Lower mount__SW22 1
- G ½__Lower mount__SW 27 1
- G ½__SW 22 1
- G ½ B 2
- G ½ B (lower mount) 1
- G½ B (male)__Stainless steel 316L__SW 22 1
- G ½ B__½ NPT__½ NPT female 1
- G ½ B__M20 x 1.5__½ NPT 1
- G ½ B female__G ½ B male__½ NPT male 1
- G ½ B male__SW 22 1
- NS 40: G 1/8 B (male) NS 50, 63: G 1/4 B (male), 1
Material Spec
Measuring range
Medium Temperature
Nominal Size
- 22 mm 1
- 40 mm__50 mm 1
- 40 mm__50 mm__63 mm 1
- 40 mm__50 mm__63 mm__80 mm 1
- 50 1
- 50 mm 1
- 50 mm__63 mm 4
- 63 mm 3
- 63 mm__80 mm 1
- 100 mm 7
- 100 mm__63 mm__80 mm 1
- 100 mm__160 mm 16
- 100 mm__160 mm__40 mm__50 mm__63 mm__80 mm 1
- 100 mm__160 mm__63 mm 3
- 144 x 144 mm__144 x 72 mm__72 x 72 mm__96 x 96 mm 1
- 160 1
- 160 mm 2
Pressure Range
Gauges
63 items
PGT43.100 / 43.160 Diaphragm Pressure Gauge
3394
Wherever the process pressure has to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the WIKA PGT43.100 / 43.160 diaphragm pressure gauge intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used. The WIKA PGT43 is based upon a WIKA 43x.30 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure measuring instrument is manufactured in accordance with EN 837-3. The intelliGAUGE WIKA PGT43.100 / 43.160 diaphragm pressure gauge fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. The robust diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft “ it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced. The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually. The electronic WIKA sensor, integrated into the high-quality diaphragm pressure gauge, combines the advantages of electrical signal transmission with a local mechanical display that remains readable during a power failure. An additional measuring point for mechanical pressure display can thus be saved.
- USD
PGT43HP.100 / 43HP.160 Diaphragm Pressure Gauge
3397
At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA PGT43HP.100 / 43HP.160 intelliGAUGE can be used. Due to the metallic construction of the pressure elements, these instruments have a high overpressure safety in the ranges of 40, 100 and 400 bar. Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The intelliGAUGE PGT43HP fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for mechanical pressure indication can thus be saved. The WIKA model PGT43HP is based upon a model 432.36 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-3. The rugged design of the diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced. The electronic WIKA transmitter, integrated into the high-quality mechanical pressure gauge, combines the advantages of electrical signal transmission with the benefits of a local mechanical display. The measuring span (electrical output signal) is set automatically along with the automatic display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually.
- USD
732.14 / 762.14 Differential Pressure Gauge
3409
The WIKA 732.14 / 762.14 differential pressure gauges are made of highly corrosion-resistant stainless steel. A high overpressure safety is achieved by the all-metal construction and the close-fitting design of the pressure measuring diaphragm. With its high-grade stainless steel construction and robust design, this pressure gauge is geared to chemical and process engineering applications. The WIKA 732.14 / 762.14 differential pressure gauge is suitable for gaseous or liquid media, also in aggressive ambience. The wetted parts for these differential pressure gauges are available also in special materials such as Monel, Hastelloy or PTFE. The scale ranges of 0 … 60 mbar to 0 … 40 bar are available to meet the requirements of a wide variety of applications.
- USD
732.18 / 733.18 Differential Pressure Gauge
3412
The WIKA 732.18 / 733.18 Differential Pressure Gauges are build for measurement of differential pressure or of two different pressures applied in refrigeration plants or compressors and simultaneous measurement of the vapour pressure and the resulting vapour temperature.
- USD
PGS23.1x0 Bourdon Tube Pressure Gauge
4219
Wherever the process pressure has to be indicated locally and, at the same time, circuits need to be switched, the WIKA PGS23.100 and PGS23.160 switchGAUGE finds its use. Switch contacts (electrical switch contacts) make or break an electric control circuit dependent upon the pointer position of the indicating measuring instrument. The switch contacts are adjustable over the full extent of the scale range (see DIN 16085), and are mounted predominantly below the dial, though also partly on top of the dial. The instrument pointer (actual value pointer) moves freely across the entire scale range, independent of the setting. The set pointer can be adjusted using a removable adjustment key in the window. Switch contacts consisting of several contacts can also be set to a single set point. Contact actuation is made when the actual value pointer travels beyond or below the desired set point. The pressure gauge is manufactured in accordance with DIN 16085 and fulfils all requirements of the relevant standards (EN 837-1) and regulations for the on-site display of the working pressure of pressure vessels. As switch contacts, magnetic snap-action contacts, reed switches, inductive contacts and electronic contacts are available. Inductive contacts can be used in hazardous areas. For triggering programmable logic controllers (PLC), electronic contacts and reed switches can be used.
- USD
A2G-mini Differential Pressure Gauge
5075
The WIKA A2G-mini differential pressure gauge can be used for monitoring differential pressures of the filter units in small and medium-sized central air-handling units. Further application cases are in industrial air extraction units and dust extraction plants as well as in the cleanroom industry. Its compact design and flush panel mounting enable an optimal integration in the enclosure structures of ventilation equipment. The pure metal design “ with the case of stainless steel and the measuring system and movement from copper alloy “ ensures maximum hygiene. Due to its silicone-free materials, the instrument can also be used in the painting industry and its applications. The high IP68 ingress protection and the UV-stabilised window also enable operation in outdoor areas.
- USD
PG23HP-S Bourdon Tube Pressure Gauge
5085
The WIKA PG23HP-S Bourdon tube pressure gauge is designed particularly for high-pressure applications up to 3,000 bar. Typical measuring points for the PG23HP-S pressure gauge are found in water jet cutting, high-pressure cleaning and test bench construction. WIKA produces and qualifies the PG23HP-S gauge by the requirements of the new DIN 16001 high-pressure standard in the S3 safety version. The safety version is made up of laminated safety glass, a solid baffle wall between measuring system and dial and a blow-out back. In the event of a failure, the operator is protected from the front side, as media or components can only be ejected via the back of the instrument. The proven, all-welded construction ensures a long service life and permanent sealing. The resistance to shock and vibration can be increased by the optional silicone oil case filling.
- USD
PG23HP-P Bourdon Tube Pressure Gauge
5088
The WIKA PG23HP-P Bourdon tube pressure gauge has been designed especially for high-pressure applications up to 6,000 bar. This makes the WIKA PG23HP-P one of the few pressure gauges available worldwide which can reliably display pressures of this order of magnitude. Typical measuring points for this pressure gauge can be found in water jet cutting, high-pressure cleaning and test bench construction. WIKA produces and qualifies the PG23HP-P pressure gauge following the requirements of the new DIN 16001 high-pressure standard in the S3 safety version. The safety version is made up of laminated safety glass, a solid baffle wall between measuring system and dial and a blow-out back. In the event of a failure, the operator is protected from the front side, as media or components can only be ejected via the back of the instrument. Through the use of high-quality stainless-steel and nickel-based alloys, the WIKA PG23HP-P bourdon tube pressure gauge features excellent load cycle stability and long service life. The instrument works reliably within the specification with both static and dynamic pressure profiles. The standard accuracy of the WIKA PG23HP-P is 1.0 %. For scale ranges up to and including 0 … 4,000 bar, the instrument is optionally available with an improved indication accuracy of 0.6 %. The resistance to shock and vibration can be increased by the optional silicone oil case filling.
- USD
732.51 Differential Pressure Gauge
6795
The WIKA 732.51 differential pressure gauge is made of highly corrosion-resistant stainless steel and features an all-metal, all-welded media chamber to ensure long-term leak tightness (no elastomer sealing elements). A high overpressure safety is achieved by the all-metal construction and the close-fitting design of the pressure measuring diaphragm. With its high-grade stainless steel construction and robust design, this pressure gauge is geared to chemical and process engineering applications. It is suitable for gaseous or liquid media, also in aggressive ambience. The optionally available low-temperature version allows the use for temperatures of down to -70 °C (-94 °F). The scale ranges of 0 … 16 mbar to 0 … 25 bar is available to meet the requirements of a wide variety of applications.
- USD