close
Categories
Filter By
Company
Accuracy
Ambient Temperature
Connection Type
- 2 x G ¼ B female__2 x G ½ B male__½ NPT male 1
- 2 x G ¼ female__2 x ¼ NPT female 2
- 2 x G ¼ female__Centre distance 26 mm__In-line__Lower 1
- 2 x G½ female, lower mount (LM) 1
- 14 mm flats lower mount 1
- 5/8 - 18 UNF (female)__9/16 - 18 UNF (female)__G ½__M 1
- 5/8 - 18 UNF x 27 (female)__9/16 - 18 UNF (female)__ 1
- 19 mm flats__2 x G 3/8 B (male)__Back mount__Lower mo 1
- 22 mm flats__G ½ 1
- Back connection 1
- Back mount__G ½__Lower mount 1
- Clamp connection per DIN 32676 / ISO 2852 / BS4825 1
- Copper alloy, lower mount (LM) G 1/4 B (male), 14 1
- G 1„8__G ¼ 1
- G ¼__SW 14 1
- G¼__SW 14 1
- G¼ B (male)__G½ B (male)__SW14__SW22 1
- G ¼ B (male)__Stainless steel 316L 1
- G ¼ B (male)__SW 14 1
- G¼ B (NS63)__G½ B (NS80, 100) 1
- G ¼ B__G …› B__¼ NPT__…› NPT 1
- G ¼ B female__G ½ B male__½ NPT male 1
- G ½ 1
- G ½__G¼ 1
- G ½__G¼__M20 x 1.5__½ NPT 1
- G ½__G¼__SW 14__SW 17__SW 22 1
- G ½__Lower mount__SW22 1
- G ½__Lower mount__SW 27 1
- G ½__SW 22 1
- G ½ B 2
- G ½ B (lower mount) 1
- G½ B (male)__Stainless steel 316L__SW 22 1
- G ½ B__½ NPT__½ NPT female 1
- G ½ B__M20 x 1.5__½ NPT 1
- G ½ B female__G ½ B male__½ NPT male 1
- G ½ B male__SW 22 1
- NS 40: G 1/8 B (male) NS 50, 63: G 1/4 B (male), 1
Material Spec
Measuring range
Medium Temperature
Nominal Size
- 22 mm 1
- 40 mm__50 mm 1
- 40 mm__50 mm__63 mm 1
- 40 mm__50 mm__63 mm__80 mm 1
- 50 1
- 50 mm 1
- 50 mm__63 mm 4
- 63 mm 3
- 63 mm__80 mm 1
- 100 mm 7
- 100 mm__63 mm__80 mm 1
- 100 mm__160 mm 16
- 100 mm__160 mm__40 mm__50 mm__63 mm__80 mm 1
- 100 mm__160 mm__63 mm 3
- 144 x 144 mm__144 x 72 mm__72 x 72 mm__96 x 96 mm 1
- 160 1
- 160 mm 2
Pressure Range
Gauges
63 items
PGS25 Bourdon Tube Pressure Gauge
3352
The robust WIKA PGS25 switchGAUGE is a combination of a Bourdon tube pressure gauge and a pressure switch. It offers the usual analogue display, which enables reading the process pressure on site, and also the possibility to switch up to two electrical signals. The switch contacts are factory-set in a range between 5 % and 95 % of the scale range. The measuring system with a bourdon tube per EN 837-1 produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. That provides a pressure-proportional signal for further processing. Depending on the switch point setting, the circuit is opened or closed when the alarm value is reached. Thus the switchGAUGE can be used actively for process monitoring, for example, to control the level of a gas cylinder or a hydraulic circuit. The switchGAUGE is available as standard in scale ranges from 0 … 1.6 bar to 0 … 400 bar with an accuracy class of 2.5 and a 1 m round cable for the electrical connection. The stainless steel case fulfils the requirements of IP65 ingress protection. The resistance to shock and vibration can be increased by the silicone oil case filling. Thus the instrument is perfectly suited for use in harsh industrial environments. Through various options (e.g. higher accuracy class, another cable length) the pressure measuring instrument can be matched exactly to the customer-specific requirements of each application.
- USD
DPGT43HP.100 / 43HP.160 Pressure Gauge
3358
At any point where a differential pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA DPGT43HP.100 / 43HP.160 intelliGAUGE (patent applied for, among others European Patent No. EP 06113003) can be used. The electronic WIKA transmitter, integrated into the model 732.14 high-quality mechanical differential pressure gauge, combines the advantages of electrical signal transmission with the benefits of a local mechanical display. The model DPGT43 is based upon a model 732.14 high-quality, stainless steel pressure gauge with a nominal size of 100 or 160. The pressure measuring instrument is manufactured in accordance with EN 837-3. The use of high-quality stainless steel materials and the robust design are geared to applications in the chemical and process engineering industries. Thus the instrument is suitable for liquid and gaseous media, also in aggressive environments. A high overload safety is achieved by the all-metal construction and the close-fitting design of the pressure element. The robust diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft “ it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal, proportional to the pressure, of 4 … 20 mA, is produced. In addition, the electrical zero point can be set manually. The electronic WIKA sensor, integrated into the high-quality mechanical differential pressure gauge, combines the advantages of electrical signal transmission with a local mechanical display that remains readable during a power failure. An additional measuring point with a mechanical pressure display can thus be saved.
- USD
DPGT40 Differential Pressure Sensor
3361
The WIKA DPGT40 differential pressure gauges of the DELTA-line product family are primarily used for the monitoring of low differential pressures where there are high requirements regarding one-sided overpressure and static pressure. Typical markets for these products are the shipbuilding industry, process heating technology, the heating, ventilation and air-conditioning industries, the water/wastewater industry, and machine building and plant construction. For these, the main function of the measuring instruments is the monitoring of filters, compressors and pumps. Wherever a signal transmission is needed and, at the same time, a differential pressure must be displayed locally, and the DELTA-trans differential pressure sensor finds its use. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced, which then acts to transmit the signal to the control room. In addition, the electrical zero point can be set manually. Often in these applications, alongside the display of the differential pressure, the current working pressure is also relevant. For this reason, a working pressure indication is integrated within the DELTA-trans differential pressure sensor as standard. The two local, easily readable, mechanical displays need no power supply and enable the simultaneous reading of the working and the differential pressure. Furthermore, this saves on an additional measuring and sealing point, reducing additional expense for piping and mounting. The robust aluminium case and shatterproof window enable a long service life of the product, even under harsh ambient conditions. This ensures that there is no danger from the instrument and it is resistant to external mechanical impacts.
- USD
APGT43.100 / 43.160 Pressure Gauge
3364
The WIKA APGT43 intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used wherever pressure measurement has to be independent of fluctuations in the atmospheric pressure. The instrument serves for the on-site display with a simultaneous signal transmission to central control or remote centre. The WIKA APGT43 is based upon a WIKA 532.54 high-quality, stainless steel pressure gauge, manufactured in accordance with DIN 16002. The intelliGAUGE® model APGT43 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. The robust diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft “ it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced. The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually. The electronic WIKA sensor, integrated into the high-quality absolute pressure gauge, combines the advantages of electrical signal transmission with a local mechanical display that remains readable during a power failure. An additional measuring point for mechanical pressure display can thus be saved.
- USD
712.15.100 & 732.15.100 Differential Pressure Gauge
3367
The WIKA 712.15.100 and 732.15.100 differential pressure gauge high-quality gauges are characterised by their compact and robust design and are primarily used for level measurement on liquid gas tanks. With 11 different measuring cells, all common tank sizes in cryotechnology are covered. As a result of the large measuring range overlap of the respective measuring cells, the gauge installed on the tank can be adjusted to match a whole variety of gases such as Ar, O2, N2 or CO2, with a full-scale deflection over a complete 270-degree sweep. The span adjustment is accessible from outside and does not affect the zero point. The mechanical display and the optional electrical output signal are calibrated simultaneously and efficiently. An optional valve manifold for flange mounting with working pressure indication makes the central measurement of both level and operating pressure possible in the one instrument. The level display can be supplied with an optional, integrated 4 ¦ 20 mA, 2-wire transmitter. Switch contacts for level and working pressure, as well as a transmitter for the working pressure, can be retrofitted on-site. The standard centre distance of 37 mm between the process connections can be adapted to a custom centre distance of 31 mm or 54 mm using adapters for flange mounting.
- USD
PGT10 USB Bourdon Tube Pressure Gauge
3370
The WIKA PGT10 USB Bourdon Tube Pressure Gauge is a unique pressure gauge because of its USB interface. With the USB interface, the gauge is capable of giving the measured-value on computer displays. Ask our product specialist for all features of the WIKA PGT10 USB Bourdon Tube Pressure Gauge.
- USD
PGT21 Bourdon Tube Pressure Gauge
3385
The WIKA PGT21 intelliGAUGE® is a combination of a Bourbon tube pressure gauge and a pressure transmitter. It offers the usual analogue display, which enables reading the process pressure on site, and in addition an analogue output signal (4 … 20 mA or DC 0.5 … 4.5 V). The measuring system with Bourdon tube per EN 837-1 produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. That provides a pressure-proportional signal for further processing. The intelliGAUGE® is available as standard in scale ranges from 0 … 1.6 bar to 0 … 400 bar with an accuracy class of 2.5 and a 1 m round cable for the electrical connection. The stainless steel case fulfils the requirements of IP65 ingress protection. The resistance to shock and vibration can be increased by the silicone oil case filling. Thus the instrument is perfectly suited for use in harsh industrial environments. Through various options (e.g. higher accuracy class, another cable length) the pressure measuring instrument can be matched exactly to the customer-specific requirements of each application.
- USD
PGT23.063 Bourdon Tube Pressure Gauge
3388
Wherever the process pressure has to be indicated locally under limited space conditions and, at the same time, a signal transmission to the central control or remote centre is desired, the WIKA PGT23.063 intelliGAUGE (patents applied for, among others Europ. patent no. EP 06113003) can be used. Through the combination of a mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the voltage supply is lost. The intelliGAUGE WIKA PGT23.063 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. An additional measuring point for mechanical pressure display can thus be saved. The WIKA PGT23.063 is based upon a WIKA 23X.30 high-quality, stainless steel safety pressure gauge with a nominal size of 63. The pressure measuring instrument is manufactured in accordance with EN 837-1. The all-welded and robust Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft “ it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, 4 … 20 mA, is produced. The electronic WIKA sensor, integrated into the high-quality pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display. The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full measuring range corresponds to 4 … 20 mA.
- USD
PGT23.100 / 23.160 Bourdon Tube Pressure Gauge
3391
At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA PGT23.100/23.160 intelliGAUGE can be used. Through the combination of a mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The intelliGAUGE WIKA PGT23 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for mechanical pressure indication can thus be saved. The WIKA PGT23 is based upon a model 23x.30 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-1. The all-welded, robust bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, 4 … 20 mA, is produced. The electronic WIKA transmitter, integrated into the high-quality mechanical pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display. The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually.
- USD