Log into our Customer Portal to chat with a product specialist, check order status, and view on-hand counts of all our products.
Filter Sort
close

Gas Detection

35 items
1 - 9 of 35
GX-6100 Multigas Detector

GX-6100 Multigas Detector

GX6100

Portable 6 Gas, Sample Draw Gas Monitor with PID, IR and Super Toxic Sensors Options Smallest 6 gas sample draw detector New 4-gas sensors with up to 3-year warranty 2 Interchangeable smart sensor slots TC sensor for %volume measurement of combustibles New ppm MOS CH4 and ppm MOS i-C4H10 sensors 4 PID options: 10.6 (2 ranges) eV, 10.0 eV, and 11.7 eV lamps Supports dual PID sensors PID library of over 600 VOCs Rapid sharing of emergency alerts via Bluetooth® Benzene specific version PPM Leak Check mode LEL sensor protection mode Man-down alarm Panic alarm Auto display rotation Peak-bar display LED Light source Internal sample pump Light weight, small, rugged IP-67 design Interchangeable battery packs (Li-ion / alkaline) Operates up to 28 hours on Li-ion battery pack, 8 hours operation with alkaline pack Field replaceable sensors, batteries, filters and pump Intrinsically safe ATEX / IECEx / cCSAus (pending) The GX-6100 is a powerful hand-held instrument capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, and H2S, the GX-6100 has 2 additional smart channels that accept PID, PPM, IR or super toxic sensors. The updated GX-6100 can measure combustible gases in PPM range and %volume in the same monitor. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6100 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6100 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC’s as well as a list of 8 of the most recently used VOC’s. A benzene-specific version is available using a pre-filter tube for detecting low levels of benzene. Four PID sensors are available, 10.0 eV, 10.6 eV (low or high range), and 11.7 eV. Any combination of two PID sensors can be installed. GX-6100 PID sensors are also resistant to humidity. The GX-6100 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6100 will easily alert users when needed. Sensors available: LEL, CL2, CO, CO2, HCN, H2S, NH3, NO2, PH3, SO2, Ammonia, Chlorine, Hydrogen Cyanide, Nitrogen Dioxide, Phosphine, Sulfur Dioxide, Carbon Dioxide, Methane, Hydrocarbon, Hydrogen Sulfide, Carbon Monoxide, Oxygen, % volume measurement of combustibles, and VOC (volatile organic compounds). GX6100 6 Operating Modes Normal Mode Barhole Mode Inert Mode Leak Check Snap Log Mode Benzene Specific
View Details
SC-9000 Toxic Gas Detector

SC-9000 Toxic Gas Detector

SC9000

Toxic Gas Monitor Features Simultaneous detection of up to 3 different toxic gases Up to 3-year gas sensor warranty Detect NH3, HF, Cl2, HCl, O3, SiH4, or PH3 Outstanding durability: Passes 1.5 m drop testing, equivalent to IP66/68 protection rating Bluetooth® equipped Inherently safe explosion-proof construction allows use in explosion-proof areas Continuous operating time: Approx. 60 hours The SC-9000 sets the new industry standard for rugged, reliable portable toxic gas detection. Featuring a compact, lightweight, durable, waterproof, and intrinsically safe design, the SC-9000 accurately detects gas leaks in toxic gas detection applications.
View Details
GX-9000H Portable Gas Detector

GX-9000H Portable Gas Detector

GX9000

Technical Data and Features Detects up to 4 gases simultaneously For detection of high concentration of H2S (1,000 ppm) Sensor warranty up to 3 years Explosion-proof, dust-proof and waterproof (equivalent to IP66/68), 1.5m drop durability Equipped with Bluetooth, easy data management via smartphone
View Details
SC-01 Single Toxic Gas Monitor

SC-01 Single Toxic Gas Monitor

1204

The Riken Keiki SC-01 single toxic gas monitor is a versatile toxic gas detector which automatically recognises any sensor change without any setup- or configuration changes. The calibration information also stays with each sensor. The SC-01™s large LCD display shows the gas reading, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms that can be set to latching or self-resetting. Controlled by a microprocessor, the Riken Keiki SC-01 continuously checks itself for sensor connections, low battery and circuit trouble. The batteries are simple to replace, requiring no tools to access the battery compartment.
View Details
SC-8000 Portable Toxic Gas Monitor

SC-8000 Portable Toxic Gas Monitor

1207

The Riken Keiki SC-8000 sets a new standard for rugged, reliable portable toxic gas detection. It's tough waterproof design utilised features based on years of gas detection design experience, to assure that the instrument will operate correctly in any situation to protect workers and property in all kinds of harsh gas detection applications. In addition to freely adjustable alarm levels, the SC-8000 configuration is very versatile due to the simple sensor replacement.
View Details
SP-220 Gas Leak Detector

SP-220 Gas Leak Detector

1210

The Riken Keiki SP-220 is a Portable Gas Leak Checker designed to simply check for Super Toxic, Combustible and Freon Gas leaks. The SP-220 is the replacement for the popular SP-205ASC. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grammes this instrument is ideal for Super Toxic, Combustible and Freon Gas Leaks.
View Details
GX-2009 Four Gas Personal Monitor

GX-2009 Four Gas Personal Monitor

1216

Replaced by the new GX-3R The Riken Keiki GX-2009 four gas personal monitor. Weighing only 130 gram, it fits in the palm of your hand 75(W) x 70(H) x 25(D). It simultaneously monitors and displays combustibles, oxygen, carbon monoxide, and hydrogen sulphide. The Riken Keiki GX-2009 represents the latest evolution of gas detection technology. Advancements include dual audible alarm ports and alarm LED™s on three sides of the instrument so that alarm conditions are visible from multiple perspectives, especially in high noise environments. Other features include a water-resistant and dustproof design with IP 67 rating, an impact-resistant rubber over-mould body that is RFI resistant, and a large capacity data logging system included as standard.
View Details
GX-8000 Portable Single Gas Monitor

GX-8000 Portable Single Gas Monitor

1221

The Riken Keiki GX-8000 sets a new standard for rugged, reliable portable gas detection. It's tough waterproof design utilized features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications. The integrated pump with 0,75 „“/min suction flow lets you take samples from up to 30 m. On top of that, GX-8000 configuration is also very versatile due to the simple sensor replacement. Additionally, alarm levels are freely adjustable adjusted to your needs. Combining all relevant certifications, such as MED (Wheelmark) and ATEX (Ex), GX-8000 is a perfect tool for marine applications. Additional features include the large LCD screen with simultaneous display of up to 5 ranges, time, live test and battery status. The display in addition to a loud and clear buzzer and 3 alarm LED's gives you a full overview at all times so that alarm conditions are obvious from multiple perspectives, especially in high noise environments. The GX-8000 features a waterproof and dustproof design with IP 67 rating for which the over-mould body is impact resistant and RFI shielded. Consequently, GX-8000 offers full protection while minimizing large instrument fleets because of its functionality. The built-in infrared port with standard data logger features lets you store, download and analyze measurement data for perfect traceability. And because of the wide accessory range, you can also customize the GX-8000 for special applications and to fit your individual requirements.
View Details
RX-51x Marine Combination Gas Detector

RX-51x Marine Combination Gas Detector

1225

The Riken Keiki RX-515, RX-516, RX-517 marine portable combination gas detectors are specially designed and developed for marine applications. When loading tanks are flushed with inert gases, the O2 content drops proportionally to some inert gases used. Catalytic EX sensors need a minimum content of oxygen in the sample gas to be able to measure combustible gases correctly. As this minimum content is not available, instruments with catalytic sensors are not suitable for conducting EX measurements in inert atmospheres. A solution to this problem is to use infrared technology sensors (NDIR). Infrared sensors measure concentrations of combustible gases reliably, even if O2 is not present. With the Riken Keiki RX-515, RX-516 or RX-517 and, its NDIR sensor you are well suited for this kind of application.
View Details
1 - 9 of 35
1234Next

Gas detection for safety critical industrial and marine environments

 

Gas detection is essential for protecting personnel, assets, and operations in environments where hazardous gases may be present. In safety critical industries, no risks can be afforded. Reliable gas detection systems support early hazard detection and safe, compliant operations across industrial, offshore, and marine environments.

 

Modern gas detection solutions are designed to detect a wide range of gas hazards, including:

 

  • Flammable gases

  • Toxic gases

  • Oxygen deficiency and enrichment

  • Process and specialty gases

 

Both portable and fixed gas detection systems are widely used for confined space entry, continuous area monitoring, and process safety applications. These systems are an integral part of daily operations within the maritime, industrial, and offshore sectors.

 

Vytl Controls supplies a comprehensive range of gas detection solutions, including portable gas detectors, fixed gas detection systems, and associated test gases. Our portfolio supports a wide range of applications and installation requirements, allowing solutions to be tailored to specific operational and regulatory needs.

 

Vytl Controls works as an authorized distributor and service partner of globally recognized gas detection manufacturers including Riken Keiki, BW Honeywell, Crowcon, Dräger, Servomex, SEMA Gases, Komyo Kitagawa, Lion Laboratories, MSA, and UNIPHOS.

 

In addition to product supply, Vytl Controls provides calibration, maintenance, and service support for gas detection equipment. Our service technicians are factory trained and work with original spare parts only, ensuring reliable performance and internationally traceable certification for gas detector calibration and maintenance.

 

Vytl Controls is proud to offer a wide selection of portable gas detection tools sold by W&O. Our selection includes single, four, multi, toxic, combustible, formaldehyde, CO/O2, HC/O2, oxygen and optical gas detectors for the marine and industrial industries. Ensure safety and traceability in critical applications – view our options and request a quote today!